User manual PHILIPS PORTABLE CD PLAYER AX7201

[. . . ] 1 The controls on the CD-player gives you a quick start. To operate all the features, use the supplied remote control. QUICK START MISE EN SERVICE RAPIDE INCIO RAPIDO longue les piles · Enlevezpériode. lorsque l'appareil reste inutilisé pendant une USAGÉESou de pilesA avec des EL 6474-F003: 02/8 u a e d o e s l por el fabricante. I O N 0 3 AX73 English CONTROLS PLAYING A CD This CD-player can play all types of Audio Discs, including CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD. [. . . ] With HOLD activated, you can avoid accidental activation of other functions. 1 Switch the slider to HOLD to activate HOLD. HoLd is shown when you press any button on the set. If the set is switched off, HoLd will be shown only when 2; is pressed on the set. 2 To deactivate HOLD, switch the slider to OFF. Note: For convenience, the remote control buttons override the HOLD function on the set. PROGRAMMING TRACK NUMBERS (remote control only) You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with or §. yprog lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. · You can review the program by pressing PROG for more than 2 seconds. yThe display shows all the stored tracks in sequence. SELECTING DIFFERENT PLAY OPTIONS - MODE (remote control only) It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as required in order to activate one of the following `modes'. The active mode is shown in the display. yshuffle: All tracks of the CD are played in random order until all of them have been played once. yshuffle repeat all: All tracks of the CD are played repeatedly in random order. yrepeat: The current track is played repeatedly. yrepeat all: The entire CD is played repeatedly. ySCAn: The first 10 seconds of each of the remaining tracks are played in sequence. 2 Playback starts in the chosen mode after 2 seconds. · To return to normal playback, press MODE repeatedly until the display shows no active modes. [. . . ] · While the CD is read, 1 -:- flashes in the display. ESP & POWERSAVING MODE With a conventional portable CD-player you might have experienced that the music stopped e. g. The Electronic Skip Protection(ESP) prevents loss of sound caused by light vibrations and shocks. However ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping! [. . . ]