User manual PHILIPS VAPEUR POWERLIFE PLUS GC2985/25

[. . . ] 5 6 7 2 8 EN  can use the steam boost function at You high temperatures (•• and above) both horizontally and vertically. Press the steam boost button briefly to apply a shot of steam to remove a stubborn crease from a garment. [. . . ] You can also press and hold the steam boost button for extra steam during ironing (specific types only). 10 11 EN  Use the spray function to remove stubborn creases at any temperature. Fill the water tank and heat the iron to ‘MAX’ temperature. Then, unplug and hold the iron over your sink. Push and hold the slide button to calc-clean while you shake the iron to flush out the water. Du har brugt dampskudsfunktionen for ofte for hurtigt efter hinanden. Solution Set the steam position to ECO or Do not fill the water tank beyond the ‘MAX’ symbol. Temporarily keep the iron horizontal before you use the steam boost function again. Use the calc-clean function until all flakes and impurities have been disposed of. Occasionally iron wet spots without steam in order to dry them. [. . . ] Occasionally iron wet spots without steam in order to dry them. To prevent steam from condensing onto the ironing board, use an ironing board with a wire mesh top. [. . . ]