User manual PHILIPS PPX2480

[. . . ] Register your product and get support at www. philips. com/welcome PPX2450 PPX2480 EN User Manual Table of Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dear Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About this User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1 General Safety Information . . . . . . . . . . . . . . . . [. . . ] 2 Insert the memory card into the slot until it snaps into position. DANGER! 1 Connect the USB adapter cable provided to the mini-USB socket on the reverse side of the device. 2 Only connect the USB storage medium to the adapter cable after the adapter cable has been connected to the device. Note USB storage medium with mini-USB connector Ensure that the adapter cable is connected to the projector and not to the USB storage medium. The signal is switched correctly between the computer connection and the USB storage medium only when using the adapter cable. Inserting a Memory Card!Never pull out the memory card while the device is accessing it. This could cause data to be damaged or lost. In order to make sure that the device does not access the memory card, press the ¿ key in the main menu until the symbol for the internal memory has been selected. 3 Press lightly on the memory card to remove it. 4 The memory card is ejected. Memory card / USB storage medium 15 6 Media Playback Note Navigation keys All the keys shown are buttons on the remote control. 9 Press ¿ to end playback and return to the overview. 10 When you press ¿ again, you will return to the main menu. Note Navigation during playback Review / cue: Press :/; on the remote control or À/Á on the device. Press T to stop or continue playback. During playback you can adjust the volume using N/ O on the remote control. Press « or N repeatedly to shut off the volume completely. Video Playback Video Playback (USB/SD card/ internal memory) 1 Switch the device on using the on/off switch on the side. 2 After the initial screen the main menu appears. File Format There are various video file formats as *. mov, *. avi, *. m4v. Many of these formats function as a container that contains the various encoded audio and video files. MPEG-4, H. 264, MP3, and AAC are all examples of encoded audio/video files. In order to play these files, the projector must read them and decode the audio/ video signals. Please note that some files cannot be played as a result of different video and audio encoders. 3 Use the navigation keys to select Videos. 5 With an inserted memory card or USB storage device: Select the internal memory, the USB storage medium or the memory card using the keys ¡/¢. 7 Use ¡/¢ to select the video file that you wish to play. Supported File Formats Container *. avi, *. mov, *. mp4 *. mkv *. ts *. m2ts *. 3gp *. flv *. asf *. rm, *. rmvb *. dat *. vob *. mpg, *. mpeg Video Format MJPEG, MPEG-4, H. 264 MPEG-4, H. 264 MPEG-2, H. 264 H. 264 H. 263 FLV (up to 800¦x¦600) ASF Real video MPEG-1 MPEG-2 MPEG-1, MPEG-2 Note Displaying video files Only those videos that are compatible with the Pocket Projector will be displayed. 8 Press à to start playback. 16 Philips · PPX2450 · 2480 Video Playback (Mini-HDMI socket) 1 Connect the audio/video output of the external device to the Pocket Projector's mini-HDMI socket. Use the corresponding cable and cable adapter for this purpose (see also chapter Connect to the playback device, page 12). 2 To find out how to deactivate the video output for the external device, please see the relevant instruction manual. Most often, this option is labeled "TV out" or "TV Output" in the corresponding menu. 3 Start the video playback on the external device. [. . . ] Preservation of the environment as part of a sustainable development plan is an essential concern of Sagemcom. The desire of Sagemcom is to operate systems observing the environment. The desire of Sagemcom is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of this products, from manufacturing to commissioning use and elimination. Packaging: The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve package recovery and recycling infrastructures. Please respect the sorting rules set up locally for this kind of waste. [. . . ]