User manual PHILIPS QC 5002

[. . . ] Noise level: Lc = 69 dB [A] Preparing for use Clipping with comb attachment: 1 Slide the arms of the comb attachment into the guiding grooves of the appliance (fig. 4 Insert the mains plug into the wall socket. [. . . ] Make overlapping strokes for precise outlining of the neck and sideburns (fig. To cut the hair around the ears, put one edge of the cutting unit on the skin. Make sure that the teeth are kept at a safe distance from the ears (fig. Shape the desired outline slowly and carefully (fig. Creating different haircuts Crew cut Select the desired hair length setting for the neck area (fig. Clip the neck area using the 'Clipping with comb attachment' technique (fig. Adjust the setting to the desired hair length for the back and sides of the head. Clip the sides and back of the head, leaving the hair on top of the head uncut (fig. For a flat top look, cut the hair on top of the head using the 'Cutting over styling comb or fingers' technique (fig. Finish the haircut by clipping the neckline, sideburns and the area around the ears using the 'Outlining' technique. Short cut Select the desired hair length setting for the back and the sides of the head (fig. Clip the back and the sides of the head using the 'Clipping with comb attachment' technique (fig. Leave the hair on top of the head uncut. select the desired hair length setting for the top of the head. [. . . ] Comb the hair in the direction of hair growth before using the clipper. Cause 2: the clipper is not being moved against the direction of hair growth. [. . . ]