User manual PHILIPS QC5340

[. . . ] do not use the appliance on freshly washed hair. 1 Comb your hair with a styling comb in the direction of hair growth. 3 To set the comb attachment to the desired hair length, press the adjustment button (1) and slide the comb attachment to the desired hair length setting (2). [. . . ] If handled properlyandaccordingtotheinstructionsinthisuser manual, the appliance is safe to use based on scientific evidenceavailabletoday. preparing for use Charging Whentheapplianceisfullycharged , ithasacordless trimmingtimeofupto35minutes(NiCdbattery)or50 minutes (NiMh battery). Do not charge the appliance for more than 24 hours. Note:The appliance cannot be run directly from the mains. Chargetheapplianceforatleast10hours(NiCdbattery) or 18 hours (NiMh battery) before you use it for the first time. 1 Make sure the appliance is switched off when you charge it. 2 Insert the appliance plug into the appliance and insert the adapter into the wall socket. 2) , The charging light on the adapter goes on to indicate that the appliance is charging (Fig. 8) 2 Make well-controlled movements and touch the hair lightly with the cutting element. Note:To contour your beard, hold the appliance with the cutting element pointing upwards (Fig. Cleaning Do not use abrasives, scourers, compressed air or liquids such as alcohol, petrol or acetone to clean the appliance. Only clean the appliance and the adapter with the brush supplied. 1 Make sure the appliance is switched off and disconnected from the mains before you clean it. 2 To remove the comb attachment, press the adjustment button (1) and pull the comb attachment off the appliance (2). Note:The cutting element cannot be detached and the appliance cannot be opened. By doing this, you help to preserve the environment (Fig. [. . . ] Note:The cutting element cannot be detached and the appliance cannot be opened. By doing this, you help to preserve the environment (Fig. Make sure the battery is completely empty when you remove it. [. . . ]