User manual PHILIPS QS 6140

[. . . ] Register your product and get support at www. ақша 74 Lietuviškai 86 Latviešu 97 Polski 108 Română 120 Русский 131 Slovensky 143 Slovenščina 154 Srpski 165 Українська 177 QS6160, QS6140 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. €1) 1 Precision trimmer (32 mm) 2 Trimming head 3 Precision trimmer (15 mm) 4 Guiding groove 5 Hair length setting selector 6 Trimming head on/off button 7 Travel lock indication (QS6160 only) 8 Shaving head on/off button 9 Shaving head 10 Battery status indicator 11 Trimming comb 12 Trimming comb (QS6160 only) 13 Charging stand 14 Adapter with small plug 15 Protection cap 16 Cleaning brush 17 Storage pouch (QS6160 only) Important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] You can use the trimming head without comb. If you use the trimming head without comb, your hair is cut off close to the skin (approx. 1 To remove the comb,  pull it off the appliance. Never pull at the flexible top of the comb. 2 Press the trimming head on/off button to switch on the trimming head. 3 Hold the appliance with the trimming head pointing upwards and make downward strokes with the broad side of the trimming head. English Using the precision trimmer 11 The precision trimmer is only half as wide as the broad side of the trimming head. It therefore allows more precise styling of the area around the ears, the sideburns and also around the mouth and under the nose. 1 To use the precision trimmer, simply turn the cutting unit until the precision trimmer points towards the  front of the appliance. 2 Press the trimming head on/off button to switch on the trimming head. 3 Hold the appliance with the trimming head pointing upwards and make downward strokes with the precision trimmer. Shaving Before you use the shaving head, always check it for damage or wear. If the shaving head is damaged or worn, do not use it, as injury may occur. Replace a damaged shaving head before you use it again (see chapter ‘Replacement’). 1 Hold the appliance in the shaving position, with the shaving head pointing upwards and the trimming head pointing downwards. 2 Press the shaving head on/off button once to switch on the shaving head. , , QS6160 only: The on/off button lights up to indicate that the shaving head is operating. 3 Place the shaving head on the skin and move the appliance against the direction of hair growth while you press it lightly. Tip -- Make sure that the shaving head is in full contact with the skin. -- You can switch on the shaving head while the trimming head is operating. If you do this, the trimming head is switched off immediately. € 12 English 4 To switch off the shaving head after use, press the shaving head on/off button again. [. . . ] 2 Put the protection cap on the shaving unit. Travel lock (QS6160 only) The appliance has an integrated travel lock which prevents the appliance from accidentally being switched on during travel. 1 To activate the travel lock, press and hold the trimming head on/off button, the shaving head on/off button or both for at least 4 seconds while the travel lock indication flashes 3 times. , , The travel lock is only activated when the indication lights up continuously. [. . . ]