User manual PHILIPS QS6161/32

[. . . ] Always here to help you Register your product and get support at www. Com/welcome QS6161 QS6141 User manual 1 ENGLISH 6 DANSK 19 DEUTSCH 32 ΕΛΛΗΝΙΚΑ 46 ESPAÑOL 60 SUOMI 74 FRANÇAIS 87 ITALIANO 101 NEDERLANDS 115 NORSK 129 PORTUGUÊS 142 SVENSKA 156 TÜRKÇE 169 QS6161, QS6141 6 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. €1) 1 Trimming head 2 Regular trimming side (32 mm) 3 Precision trimming side (15 mm) 4 Guiding groove 5 Hair length setting selector 6 Trimming head on/off button 7 Travel lock indication (QS6161 only) 8 Shaving head on/off button 9 Shaving head 10 Battery status indicator 11 Regular trimming comb 12 Precision trimming comb (QS6161 only) 13 Charging stand 14 Adapter with small plug 15 Protection cap 16 Cleaning brush 17 Storage pouch (QS6161 only) Important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] 11 2 Press the trimming head on/off button to switch on the trimming head. 3 Hold the appliance with the trimming head pointing upwards and make downward strokes with the precision trimming head. Shaving Before you use the shaving head, always check it for damage or wear. If the shaving head is damaged or worn, do not use it, as injury may occur. Replace a damaged shaving head before you use it again (see chapter ‘Replacement’). Shaving tips and tricks -- The shaving head is suitable for both wet and dry use. Note:We advise you to use the shaving head with shaving gel or foam when you use it for a wet shave. Do not use thick shaving cream or shaving oil with this shaver. € -- Make sure that the shaving head is in full contact with the skin. -- You can switch on the shaving head while the trimming head is operating. If you do this, the trimming head is switched off immediately. € -- Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. Wet shaving 1 Apply some water to your skin. 12 ENGLISH 2 Apply shaving foam or shaving gel to your skin. 3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin. 4 Hold the appliance in the shaving position, with the shaving head pointing upwards and the trimming head pointing downwards. 5 Press the shaving head on/off button once to switch on the shaving head. , , QS6161 only: The on/off button lights up to indicate that the shaving head is operating. 6 Place the shaving head on the skin and move the appliance against the direction of hair growth while you press it lightly. Note: Rinse the shaving head under the tap regularly to ensure that it continues to glide smoothly over your skin. ENGLISH 7 To switch off the shaving head after use, press the shaving head on/ off button again. 8 Clean the shaving head (see chapter ‘Cleaning and maintenance’, section ‘Quick cleaning the shaving head after wet shaving’). [. . . ] 1 To fold the charging stand: fold the base of the charging stand against the appliance holder. 2 Put the protection cap on the shaving unit. Travel lock (QS6161 only) The appliance has an integrated travel lock which prevents the appliance from accidentally being switched on during travel. 1 To activate the travel lock, press and hold the trimming head on/off button, the shaving head on/off button or both for at least 4 seconds while the travel lock indication flashes 3 times. [. . . ]