User manual PHILIPS RI-8177

[. . . ] Before using the machine, please read the attached operating instructions. Carefully read the safety rules During use, every precaution must be taken to limit the risk of fire, electric shock and/or accidents. ⷠRead carefully all the instructions and information listed in this manual and in any other booklet contained in the packaging before turning on or using the espresso machine. To avoid fires, electric shocks or accidents, do not immerse the cord, plug or body of the machine in water or other liquid. [. . . ] Previous page After having set each of the following menus, press - To return to the previous screen WITHOUT saving the new settings; to save; to return to the main menu WITHOUT saving the new settings. When the machine settings are selected the following screen appears. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. In this menu you can: This function activates/deactivates a tone every time the machine is ready. In this menu you can: This function activates/deactivates a tone every time a key is pressed. In this menu you can: Press "cup-warming surface" In this menu you can: Keep the cup-warming surface always on. Keep the cup-warming surface always off. Keep the cup-warming surface off when the machine is in stand-by mode To clean the internal circuits in order to guarantee that the beverages are only made with fresh water. the function is enabled as default by the manufacturer. Note: this rinse cycle is performed every time the machine is turned on after the warming phase. You can set the amount of time the machine waits after the last dispensing to go into stand-by mode. After 3 hours After 15 min after 30 min After 1 hour After 3 hours When the set time has elapsed, the machine goes in stand-by. to exit stand-by mode , press "start". After warming up and performing a self-test, the machine is once again ready for use. With this function the machine turns on (activate) and turns off (energy saving) at the desired times. The machine performs this function only if it is turned on at the main power button. In this menu you can: Set the first interval for turning on and off set the third interval for turning on and off Interval 1 on 00:00 off 00:00 interval 3 on 00:00 off 00:00 Interval 2 on 00:00 off 00:00 week day settings Set the second interval for turning on and off choose the days that the intervals are active To correctly set the parameters, you must: - set the individual intervals for turning on and turning off the machine; - choose which days these intervals will be active. It is recommended not to overlap intervals for turning on the machine. In order to set an interval for turning on the machine, press the key for the interval that you wish to set. Adjust the hour for turning on by pressing + or ­ Adjust the minutes by pressing + or ­ After having set the turn on time, adjust the turn off time by pressing the key. Adjust the hour for turning off by pressing + or ­ Adjust the minutes by pressing + or ­ Press the key to return to the turn on times. [. . . ] ⷠAny repairs must be performed by an authorized customer service center. ⷠDo not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. Turn off the appliance before opening the service door. [. . . ]