User manual PHILIPS RI9127

[. . . ] Dear Customer, Thank you for purchasing the Maintenance Kit for Saeco fully automatic espresso/ coffee machines. This kit will allow you to perform a scheduled maintenance of the brew group so as to maintain your machine in perfect working order and enjoy a delicious coffee. [. . . ] This patented technology allows you to thoroughly clean the parts of the brew group in contact with coffee and the entire brewing area inside the machine. This brew group maintenance kit comes with 2 different O-rings, as shown on the previous page (small and large). Before starting the instructions on the following pages, overturn the brew group, and choose the correct O-ring size based on the images below. (The following images show the filter screen with the upper part of the brew group removed. This is for demonstration purposes only; the upper part of the brew group should never be removed. Wash the brew group with running water at least once a week. Lubricate the brew group tracks and replace the O-ring after approximately 500 brewing cycles. Do not wash the brew group with harsh or abrasive detergents or chemicals which could prevent it from operating correctly. Rinse off any coffee residues from the brew group. Wash the upper filter with running water. Make sure the brew group is in the rest position; the two references must match. Make sure that all components are in the correct position. [. . . ] We recommend cleaning the water shaft immediately after the brew group cleaning. (Please note: After each brewing cycle, water fl ows through the residual water shaft and into the drip tray. [. . . ]