User manual PHILIPS RI 9343

[. . . ] Congratulations, Congratulations on choosing this top-quality espresso machine and many thanks for your confidence in our products. Before operating the machine, we recommend you read the following instructions thoroughly which explain how to use, clean and maintain the machine. For any other information, please contact the leader or our company directly. We will be glad to provide you with any explanations you may need. [. . . ] The machine is now ready to be connected to the house electricity supply. Accessories (the accessories vary depending on the model) "Crema" filter holder Filter for "Crema" filter holder (A single unit for making 1 or 2 cups of coffee) Brass filter holder Single cup filter for brass filter holder Twin cup filter for brass filter holder Coffee measure Electricity can be dangerous, so always follow the safety regulations carefully. Faulty plugs and cables must be changed immediately by authorised personnel. The coffee maker must be connected to a suitable wall socket. the voltage of the appliance has been factory-set. The voltage on the rating plate (positioned on the bottom of the appliance) must correspond to that of your house electricity supply. Water tank Water tank lid Main switch Coffee switch with machine ready light incorporated Steam switch Steam/hot water knob Coffee outlet Steam tube Mains cable Drip tray + grill Before using the machine for the first time, after the appliance has been left unused for a long period or when the water And steam have run out, it is necessary to prime the machine. ⷠTurn on the main switch (3), the light on the inside will be on. Open the "hot water/steam" knob (6), turning it in an anti-clockwise direction and press the coffee switch (4). ⷠWait until a steady stream of water flows from the tube ("Pannarello"). ⷠPress the coffee switch (4) again and close the "hot water/steam" knob (6), turning it in a clockwise direction. The machine is now ready to make a perfect cup of coffee. COFFEE FLOW in the dispenser unit (7) from below, turning it from left to right until it locks into place. To warm up the filter holder and the cup, press the coffee switch (4); water will begin to drip from the filter holder (this operation is only necessary for the first cup of coffee). ⷠWhen the cup is sufficiently full, press the coffee switch (4) again. ⷠRemove the filter holder from the machine by turning it to the left and pour out any water that is left inside. ⷠWith the special "Crema" filter holder (11) supplied with the machine, it is not necessary to change the filter to obtain one or two cups of coffee. ⷠTo make one or two cups of coffee, add 1 or 2 even measures of ground coffee to the filter. ⷠClean the edges of the filter holder from any excess of coffee grounds. ⷠInsert the "Crema" filter holder (11) in the dispenser unit (7) from below, turning it from left to right until it locks into place as directed above. position two warmed cups under the · Filter holder, making sure that they are directly under the coffee spouts. Wait until the cups are sufficiently filled. [. . . ] ⷠDo not immerse the coffee maker in water and do not put any of the components in a dishwasher. ⷠDo not use sharp objects or abrasive chemical products (solvents) to clean the machine. Clean the water tank and fill it with · After heating milk, release a small quantity of hot water to clean out the steam tube and wipe the outside of it with a damp cloth. ⷠUse a damp cloth to wipe down the appliance. [. . . ]