User manual PHILIPS RI 9585

[. . . ] Dear Customer thank you for purchasing the Saeco Lavazza A MODO MIO espresso coffee machine and for your confidence in our company. Before operating the machine, we recommend carefully reading the operating instructions that explain how to use, clean and maintain it in perfect working order. We hope you enjoy brewing excellent coffee, thanks to Saeco and Lavazza!Steam ready light Steam button Coffee brew button Coffee ready light Incorrect use not in accordance with the intended purposes; · Repairs not carried out in authorised service centres; · Tampering with the power cord; · Tampering with any parts of the machine; · The use of non-original spare parts and accessories; · Use at temperatures below 10°C or above 40°C; · Use at a relative humidity above 95%; · Use of pods other than those indicated. [. . . ] CLEANING THE POD HOLDER Carry out the COFFEE BREWING procedure weekly without inserting the pod. Then wash the pod holder under running water. BREW UNIT Weekly clean the brew unit and eliminate traces of coffee by using a small cooking brush. Warning: Pod perforators are situated inside the pod holder and the brew unit. Please, take care not to prick yourself when cleaning them. CLEANING THE POD DRAWER Remove the used pod drawer and wash it. Remove the upper grill and rinse it with fresh running water. Limescale builds up with the normal use of the appliance; the machine needs descaling every 1-2 months and/or whenever a reduction in water flow is noticed. Its formula has been designed to ensure better machine performance and operation for its whole operating life. if correctly used , it also avoids alterations in the brewed product. The descaling solution is to be disposed of according to the manufacturer's instructions and/or regulations in force in the country of use. Note: before starting a descaling cycle make sure that: THE WATER FILTER (if used) HAS BEEN REMOVED. Never drink the descaling solution and any substances dispensed until the cycle has finished. Turn the machine on by pressing the power button and dispense 2 cups (approx. 150 ml each) of water by using the steam / hot water wand. Then turn the machine off by means of the power button and leave it off for 3 minutes. Repeat the operations as described from step is completely empty. Rinse the water tank with clean drinking water and fill it again. switch on the machine by pressing the power button. Place one cup under the pod holder and then press the coffee brew button to dispense the whole content of the tank. to stop dispensing , press the button again. Fill the tank again with fresh drinking water. [. . . ] If damaged, the power cord must be replaced by the manufacturer or an authorised service centre or in any case by a person with a similar qualification. Do not pass the power cord around corners, over sharp edges or over hot objects and keep it away from oil. Do not use the power cord to carry or pull the coffee machine. Do not pull out the plug by pulling on the power cord or touch it with wet hands. [. . . ]