User manual PHILIPS RQ1085

[. . . ] Introduction Thank you for buying this Philips shaver. Please read this user manual, as it contains information about the wonderful features of this shaver as well as some tips to make shaving easier and more enjoyable. Important Read this user manual carefully before you use the shaver, the Jet Clean System and the Power Pod. Save the user manual for future reference. [. . . ] Trimming You can use the trimmer to groom your sideburns and moustache. , The display lights up for a few seconds. press the trimmer slide forwards to slide out the trimmer. 5 Press the trimmer slide backwards to retract the trimmer. 6 Press the on/off button once to switch off the shaver. , The display lights up for a few seconds and then shows the remaining battery capacity (RQ1090/ RQ1060 only). Then press the shaving unit downwards (2) to attach it to the shaver (`click'). Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. - The best and most hygienic way to clean the shaver is in the Jet Clean System. You can also rinse the shaver under the tap or clean it with the brush supplied. Always check if the water is not too hot, to prevent your hands from getting burnt. - Clean the shaver after every shave for optimal shaving performance. - You can clean the outside of the shaver with a damp cloth. - Regular cleaning guarantees better shaving performance. Cleaning the shaving unit in the Jet clean system The Jet Clean System has three cleaning programs: the eco program, the normal program and the intensive program. the shaver automatically chooses the appropriate cleaning program. Preparing the Jet clean system for use Fill the cleaning chamber before first use. Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning chamber (2). , The cleaning chamber remains behind. Unscrew the cap from the bottle with cleaning fluid and remove the airtight seal. Make sure the release buttons click back into place. [. . . ] 2 Why doesn't the shaver work when I press the on/off button?Press the on/off button for 3 seconds to deactivate the travel lock. - The shaving unit is soiled or damaged to such an extent that the motor cannot run. In this case, the shaving unit symbol, the tap symbol and the exclamation mark flash. [. . . ]