User manual PHILIPS RQ 1150

[. . . ] Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable. 1) a Shaver (RQ1180/RQ1160/RQ1150) 1 Trimmer 2 Protection cap 3 Shaving unit 4 Shaver 5 Shaver on/off button 6 Display B Charger c Jet Clean System (specific types only) 1 Shaver holder 2 'Cleaning chamber empty' symbol 3 Cleaning symbol 4 Drying symbol 5 Jet Clean System on/off button 6 Cleaning chamber release button D Cleaning brush E Cleaning fluid F Pouch (specific types only) g Adapter important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] , RQ1180: The display lights up for a few seconds to show the remaining battery capacity. Note: Do not turn the trimming unit while you pull it off the shaver. 7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press the shaving unit downwards (2) to attach it to the shaver (`click') (Fig. Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance and the Jet Clean System. The best and most hygienic way to clean the shaver is in the Jet Clean System (specific types only). You can also rinse the shaver under the tap or clean it with the brush supplied. Always check if the water is not too hot, to prevent your hands from getting burnt. Clean the shaver after every shave for optimal shaving performance. You can clean the outside of the shaver with a damp cloth. regular cleaning guarantees better shaving performance. Cleaning the shaving unit Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. 1 Rinse the shaving unit under a hot tap for some time (Fig. Note:You can also brush the shaving unit with the cleaning brush supplied. 2 Pull the shaving head holder off the bottom part of the shaving unit and rinse it under a hot tap for 30 seconds (Fig. Note:You can also brush the shaving head holder with the cleaning brush supplied. 3 Carefully shake off excess water and let the shaving unit dry. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 4 Reattach the shaving head holder to the bottom of the shaving unit (`click') (Fig. Cleaning the shaving unit in the Jet clean system (specific types only) The Jet Clean System has an automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in the automatic cleaning program. [. . . ] The shaver does not work when I press the on/off button. The shaving head holder is soiled or damaged to such an extent that the motor cannot run. the temperature of the shaver is too high. The shaver is not entirely clean after I clean it in the Jet Clean System. [. . . ]