User manual PHILIPS RQ1175/32

[. . . ] Always here to help you Register your product and get support at www. €1) A Shaver 1 Display 2 Shaver on/off button 3 Protection cap 4 RQ11 Shaving unit B CRP331 Trimmer (specific types only) C Jet Clean System (specific types only) 1 Shaver holder 2 ’Cleaning chamber empty’ symbol 3 Cleaning symbol 4 Drying symbol 5 Jet Clean System on/off button 6 Cleaning chamber release button D Adapter E Foldable charger F Cleaning brush G HQ200 Cleaning fluid (specific types only) H Pouch (specific types only) The display Note: If there is a protective foil on the display, remove it before you use the shaver for the first time. The various shaver types have different displays, which are shown in the figures below. 7 RQ1180 -- When the shaver is charging, first the bottom charging light flashes, then the second charging light, and so on until the shaver is fully charged. [. . . ] 1 Pull the shaving unit straight off the shaver. Note: Do not twist the shaving unit while you pull it off the shaver. 11 2 Insert the lug of the trimmer into the slot in the top of the shaver (1). Then press down the trimmer (2) to attach it to the shaver (‘click’). 3 Press the on/off button once to switch on the trimmer. , , RQ1180: The display lights up for a few seconds. 5 Press the on/off button once to switch off the trimmer. , , RQ1180: The display lights up for a few seconds to show the remaining battery capacity. 6 Pull the trimmer straight off the shaver. Note: Do not twist the trimming unit while you pull it off the shaver. 7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press down the shaving unit (2) to attach it to the shaver (‘click’). 12 English Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the shaver, its accessories and the Jet Clean System (specific types only). -- The best and most hygienic way to clean the shaver is in the Jet Clean System (specific types only). You can also rinse the shaver under the tap or clean it with the brush supplied. -- Clean the shaver after every shave for optimal shaving performance. -- You can clean the outside of the shaver with a damp cloth. -- Regular cleaning guarantees better shaving performance. Cleaning the shaving unit Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Remove it from the charger or remove it from the Jet Clean System (specific types only). 2 Rinse the shaving unit under a hot tap for some time. [. . . ] You can wipe the outside of the Jet Clean System with a damp cloth. 1 Simultaneously press the release buttons on both sides of the Jet Clean System (1). Then lift the Jet Clean System off the cleaning chamber (2). , , The cleaning chamber remains behind. [. . . ]