User manual PHILIPS RQ1185/21

[. . . ] Always here to help you Register your product and get support at www. Com/welcome RQ1100 series User manual 1 RQ119x, RQ118x, RQ117x, RQ116x, RQ115x, RQ114x, RQ113x ENGLISH 4 БЪЛГАРСКИ 26 ČEŠTINA 50 EESTI 72 HRVATSKI 94 MAGYAR 116 ҚАЗАҚША 138 LIETUVIŠKAI 161 LATVIEŠU 183 POLSKI 205 ROMÂNĂ 228 РУССКИЙ 251 SLOVENSKY 274 SLOVENŠČINA 296 SRPSKI 317 УКРАЇНСЬКА 339 4 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable. [. . . ] Note:You can also clean the shaving unit with the cleaning brush supplied. € 3 Pull the shaving head holder off the bottom part of the shaving unit and rinse it under a hot tap for 30 seconds. Note:You can also clean the shaving head holder with the cleaning brush supplied. € 16 ENGLISH 4 Carefully shake off excess water and let the shaving head holder dry. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 5 Reattach the shaving head holder to the bottom part of the shaving unit (‘click’). Cleaning the shaving unit in the Jet Clean System (RQ1197CC, RQ1195CC, RQ1185CC, RQ1180CC, RQ1175CC only) The Jet Clean System has an automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in this automatic cleaning program. Preparing the Jet Clean System for use Fill the cleaning chamber before first use. 1 Put the small plug in the Jet Clean System. , , The holder automatically moves to the highest position. 3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning chamber (2). , , The cleaning chamber remains behind. 4 Unscrew the cap from the bottle with HQ200 cleaning fluid. € 5 Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines. 6 Place the Jet Clean System back onto the cleaning chamber. Make sure the release buttons click back into place. Using the Jet Clean System Note: If you use the shaver with shaving foam or shaving gel, we advise you to rinse it under the hot tap before you clean it in the Jet Clean System. This guarantees an optimal lifetime for the cleaning fluid. ENGLISH 17 1 Hold the shaver upside down above the holder with the back of the shaver pointing towards the holder. 2 Place the shaver body in the holder behind the two clips (1) and press it down until it locks into place (2). [. . . ] Clean the shaving head holder or replace it (see chapters ‘Cleaning and maintenance’ and ‘Replacement’). The shaving head holder is soiled or damaged to such an extent that the motor cannot run. ENGLISH Problem Possible cause The temperature of the shaver is too high. RQ1197CC, RQ1195CC, RQ1185CC, RQ1180CC, RQ1175CC only: The shaver is not entirely clean after I clean it in the Jet Clean System. [. . . ]