User manual PHILIPS RQ1280CC

[. . . ] Always here to help you RQ1200 series User manual 1 ENGLISH 4 БЪЛГАРСКИ 28 ČEŠTINA 54 EESTI 78 HRVATSKI 102 MAGYAR 126 ҚАЗАҚША 149 LIETUVIŠKAI 174 LATVIEŠU 198 POLSKI 222 ROMÂNĂ 246 РУССКИЙ 271 SLOVENSKY 296 SLOVENŠČINA 320 SRPSKI 344 УКРАЇНСЬКА 368 RQ1200 series 4 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable. €1) A Shaver 1 Display 2 Shaver on/off button 3 Protection cap 4 RQ12 Shaving unit 5 Trimmer 6 Trimmer on/off slide B RQ111 Beard Styler attachment (RQ1296, RQ1295, RQ1286, RQ1285, RQ1275, RQ1265 only) 7 Hair length selector 8 Comb of Beard Styler attachment C Foldable charger D Jet Clean System (RQ1296CC, RQ1295CC, RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC, RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC, RQ1250CC only) 9 ’Cleaning chamber empty’ symbol 10 Cleaning symbol 11 Drying symbol 12 Jet Clean System on/off button (RQ1008 only: and up/down button for program selection) 13 Cleaning chamber release button 14 Shaver holder E Cleaning brush F HQ200 Cleaning fluid (RQ1296CC, RQ1295CC, RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC, RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC, RQ1250CC only) G Pouch H Adapter Important Read this important information carefully before you use the shaver, the Jet Clean system (RQ1296CC, RQ1295CC, RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC, RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC, RQ1250CC only) and the charging stand. [. . . ] The intensive program is a more thorough cleaning program. -- Type RQ1007 has one automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in the automatic cleaning program. € Preparing the Jet Clean System for use Fill the cleaning chamber before first use. 1 Put the small plug in the Jet Clean System. , , The holder automatically moves to the highest position. ENGLISH 17 3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning chamber (2). , , The cleaning chamber remains behind. 4 Unscrew the cap from the bottle with HQ200 cleaning fluid. € 5 Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines. 6 Place the Jet Clean System back onto the cleaning chamber. Make sure the release buttons click back into place. Using the Jet Clean System Note: If you use the shaver with shaving foam or shaving gel, we advise you to rinse it under the hot tap before you clean it in the Jet Clean System. This guarantees an optimal lifetime for the cleaning fluid. 1 Hold the shaver upside down above the holder with the back of the shaver pointing towards the holder. 2 Place the shaver body in the holder behind the two clips (1) and press it down until it locks into place (2). , , The display shows that the shaver is charging (see chapter ‘The display’). 3 RQ1008: Press the up/down button to select a cleaning program. 18 ENGLISH 4 Press the on/off button on the Jet Clean System to start the cleaning program. , , The shaver display stops showing the charging indication. , , The cleaning light starts to flash and the shaver is automatically lowered into the cleaning fluid. [. . . ] RQ1295CC, RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC, RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC, RQ1250CC only: The shaver is not entirely clean after I clean it in the Jet Clean System. If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program aborts. The cleaning light and the ‘cleaning chamber empty’ symbol flash at intervals and the holder returns to its starting position. You have used another cleaning fluid than the original Philips cleaning fluid. [. . . ]