User manual PHILIPS RQ1285

[. . . ] note: In this user manual the term `appliances' refers to the shaver and the Jet Clean System. If your shaver does not come with a Jet Clean System, it refers to the shaver only. General Danger Make sure the adapter does not get wet (Fig. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. [. . . ] Wet shaving You can also use this shaver on a wet face with shaving foam or shaving gel. To shave with shaving foam or shaving gel, follow the steps below: 1 Apply some water to your skin. 2 Apply shaving foam or shaving gel to your skin. 3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin. 4 Press the on/off button once to switch on the shaver. 5 Move the shaving heads in circular movements over your skin. Note: Rinse the shaver under the tap regularly to ensure that it continues to glide smoothly over your skin. 6 Dry your face and thoroughly clean the shaver after use (see chapter `Cleaning and maintenance'). Note: Make sure you rinse all foam or shaving gel off the shaver. Trimming You can use the trimmer to groom your sideburns and moustache. 1 Pull the shaving unit straight off the shaver (Fig. When you press the on/off button, the Jet Clean System starts cleaning in the automatic cleaning program. 30) preparing the Jet clean system for use Fill the cleaning chamber before first use. 4 Unscrew the cap from the bottle with cleaning fluid. Then press the shaving unit downwards (2) to attach it to the shaver (`click') (Fig. 3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning chamber (2). 5 Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines (Fig. Make sure the release buttons click back into place. Using the Jet clean system Note: If you use the shaver with shaving foam or shaving gel, we advise you to rinse it under the hot tap before you clean it in the Jet Clean System. this guarantees an optimal lifetime for the cleaning fluid. 1 Press the shaver tightly into the holder to lock it into place. [. . . ] If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program aborts. The cleaning light and the `cleaning chamber empty' symbol flash at intervals and the holder returns to its starting position. You have used another cleaning fluid than the original Philips cleaning fluid. The Jet Clean System does not work when I press the on/off button. [. . . ]