User manual PHILIPS RQ1295/23 SENSO TOUCH 3D

[. . . ] Always here to help you Register your product and get support at www. €1) A Shaver 1 Display 2 Shaver on/off button 3 Protection cap 4 RQ12 Shaving unit 5 Trimmer 6 Trimmer on/off slide B Foldable charger C Jet Clean System (specific types only) 1 ’Cleaning chamber empty’ symbol 2 Cleaning symbol 3 Drying symbol 4 Jet Clean System on/off button (RQ1008 only: up/down button for program selection) 5 Cleaning chamber release button 6 Shaver holder D Cleaning brush E HQ200 Cleaning fluid F Pouch G Adapter The display Note: Before you use the shaver for the first time, remove the protective foil from the display. The various shaver types have different displays, which are shown in the figures below. -- Quick charge: When the shaver contains enough energy for one shave, the display shows 5 minutes in red. [. . . ] 6 Dry your face and thoroughly clean the shaver after use (see chapter ‘Cleaning and maintenance’). Note: Make sure you rinse all foam or shaving gel off the shaver. Using the trimmer You can use the trimmer to groom your sideburns and moustache. 1 Pull the shaving unit straight off the shaver. Note: Do not twist the shaving unit while you pull it off the shaver. 2 Press the on/off button once to switch on the shaver. , , The display lights up for a few seconds. 3 Slide the trimmer slide forwards to slide out the trimmer. 5 Slide the trimmer slide backwards to retract the trimmer. 6 Press the on/off button once to switch off the shaver. , , The display lights up for a few seconds and shows the remaining battery capacity. 12 English 7 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press down the shaving unit (2) to attach it to the shaver (‘click’). Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the shaver, its accessories and the Jet Clean System (specific types only). -- The best and most hygienic way to clean the shaver is in the Jet Clean System (specific types only). You can also rinse the shaver under the tap or clean it with the cleaning brush supplied. Always check if the water is not too hot, to prevent your hands from getting burnt. -- Clean the shaver after every shave for optimal shaving performance. -- You can clean the outside of the shaver with a damp cloth. -- Regular cleaning guarantees better shaving performance. Cleaning the shaving unit C F Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. [. . . ] Only replace the shaving unit with an original RQ12 Philips Shaving unit. MINUTES LEFT 1 The shaving unit symbol flashes (all types) and you hear a beep (RQ129x/RQ128x only) when you switch off the shaver . Note:The displays of the different types look different, but show the same symbol. 2 Pull the old shaving unit straight off the shaver. [. . . ]