User manual PHILIPS RTH718

[. . . ] Micro Recordable Theater RTH718 User Manual CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. `CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. ' 2 Index This product incorporates copyright protection technology that is protected by US patents. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. [. . . ] Helpful Hint: ­ Set the timer recording one minute ahead of the program's start time. This helps ensure the entire program is recorded as the disc requires about 30 seconds to prepare for recording. Changing/ Deleting a timer recording A Turn on the TV power. Select the correct Video In channel at the TV. The timer schedule list appears. Timer Schedule Source Rec Mode Date Start End Rec To 1 CH003 2 EXT 1 3 CH008 4 5 6 SP EP SP 01/31/05 10. 33 PM 11. 03 PM HDD 01/25/05 04. 00 PM 05. 30 PM DVD 01/30/05 10. 00 AM 11. 15 AM HDD C Use keys to select a timer program which you want to change/ delete. Setting a timer recording from an external Cable Box/ Satellite Receiver If you have a Satellite Receiver/Cable Box connected to this recorder via the VIDEO (CVBS) (see "Optional Connections - Connecting to a Cable Box or Satellite Receiver", ) follow the steps described below to program the recordings. A Select the channel you want to record at the Satellite Receiver/Cable Box. B Program the recording with the required information. Follow the steps A~D of "Timer Recording (manually)" on the previous page. When selecting options for { Source } choose { EXT 1 } or { EXT 2 } as the input channel and press OK to confirm. C Keep the Satellite Receiver/Cable Box switched on for the recording. D Press STANDBY-ON 2 to turn off the recorder. TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred from HDD to a recordable DVD. D To delete the timer entry, press SELECT on the remote control. E To change the timer schedule, press OK to enter the timer editor menu of the selected timer program. Timer Editor Source Rec To Rec Mode Mode Date Start End Title OK OK Ch003 HDD SP Once 01/31/05 10:33 PM 11:03 PM M y T i t l e 01 OK CANCEL F Select the entry field and make the necessary changes. G Once complete, select OK OK in the menu and press OK to save the changes. H Press TIMER to exit the menu. 47 English To cancel the above timer setting, press SELECT on the remote control. Playback from Hard Disk English Playback your HDD recordings Each recording stored on the HDD is displayed in the HDD content menu with an index picture. B Use keys to highlight a title and press OK on the remote control to start playback. If you have many HDD title recordings, use or to view the previous/ next page of HDD titles for selection. HDD No Ch. 001 CH001 002 CH003 003 CH009 004 CH004 005 CH002 006 CH008 007 CH012 008 CH010 Date 05/20/05 05/14/05 04/25/05 04/30/05 03/28/05 04/12/05 05/08/05 06/30/05 Time 02. 00 PM 04. 00 PM 08. 30 PM 03. 30 PM 08. 30 PM 11. 00 AM 08. 30 PM 10. 30 PM Title Travel News Drama Nature News Title 3 News Discover 00:00:00 01:15:30 00:38:36 ­ move to the beginning or previous/ next chapter. ­ hold down this button to start fast backward/ forward search, press the button again to increase the search speed. ­ jump backward by 10 seconds. 00:20:20 SP NTSC 1. Press [SELECT] to mark or unmark recordings. Press [HDD] to copy selected recordings to DVD. Press [SHUFFLE] to sort by title. (PLAY) ­ starts playback PAUSE ­ view a still picture. For other options, press [DVD], [DV], [TUNER] keys. [. . . ] Region code: A system allowing discs to be played only in the region designated. This unit will only play discs that have compatible region codes. You can find the region code of your unit by looking on the product label. Some discs are compatible with more than one region (or ALL regions. ) S-Video: Produces a clear picture by sending separate signals for the luminance and the color. [. . . ]