User manual PHILIPS SA1356

[. . . ] > A USB connection screen will be shown as soon as your player is connected. 2 Charge your player for 4 hours** or until the battery icon stops blinking. ** Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Battery life and number of charge cycles vary by use and settings. 5 Read the battery level indication of your player The approximate power levels of your battery are indicated as follows: Full Two-thirds full Half full Low Empty Tip When the batteries are nearly empty, the battery low screen blinks. Your player will power down in less than 60 seconds. Your player will save all settings and un-finished recordings before it powers down. Transfer You can organize files and transfer music to your player during a USB connection session using Windows Explorer. [. . . ] Your voice recording will be saved in your VOICE folder on your player. (Filename: MIC-XXX. wav where XXX is the track number which is automatically generated. ) Make FM recordings* In radio mode, tune to your preset station. > Your player shows the recording state. > Your player shows the saving state. Your FM recording will be saved in your FM folder on your player. (Filename: FM-XXX. wav where XXX is the track number which is automatically generated. ) * FM radio is only available to some regional versions. 12 Play back recordings You can find your voice recordings and FM recordings in the VOICE and FM folders respectively. 1 From the root menu, select RECORDINGS to enter into the VOICE / FM library. Your player will play all your recordings alphabetically in the VOICE/FM library as you press 2;. 2 Press 2; to pause the current playing recording. 3 Press J( or )K to play next or previous recordings. Tip Playback of recordings functions the same way as in the Music mode. See Music mode > Playback section for more information. 13 Customize settings You can set your preferences in your player to suit your needs. 1 Press MENU and choose General settings. 2 Press 2; to confirm your selection, and press +/- to select further options. 3 Press MENU to exit the current settings screen. Settings Power save Screen saver Time out Sleep timer Resume OSD language Information Factory settings Further Options On / Off Display: Clock vertical / Clock horizontal / Animation Time: 10 sec / 30 sec / 60 sec / Off 3 min / 5 min / 10 min / 30 min / Off 15 min / 30 min / 45 min / 60 min / Off On / Off English / French / German / Spanish / Italian / Portuguese / Dutch / Swedish / Poland / Russian Firmware (FW) version / Memory available Restore factory settings 14 About Firmware manager Your player is controlled by an internal program called firmware. With Firmware Manager, you can update and restore your player with a few simple clicks. Install Firmware Manager 1 Insert the supplied CD into the CD ROM drive of your computer. 2 Follow the onscreen instructions to begin and complete the installation. Update and restore firmware Warning Upgrade and repair result in loss of data and media contents on your player. You are suggested to backup your data regularly. 1 Insert the supplied CD into the CD ROM drive of your computer. 2 Install Firmware Manager from the supplied CD to your computer. 3 Connect to the Internet, launch Firmware Manager. [. . . ] ** Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Battery life and number of charge cycles vary by use and settings. + 1MB = 1 million bytes; available storage capacity will be less. 1GB = 1 billion bytes; available storage capacity will be less. [. . . ]