User manual PHILIPS SA178-07B

[. . . ] 1 2 Click and highlight one or more music track to transfer between your player and your computer. Use drag and drop actions to complete your transfer. Safely disconnect your device Exit any active application working with your player. Safely remove your device by clicking from your task tray. WINDOWS98SE USERS:There is no icon. Simply disconnect your device after file transfer completes. [. . . ] The preset will be automatically played. ***FM radio is only available to some regional versions. 9 Making recordings When your device is not connected to the computer, you can make voice or radio recordings. Making voice recording 1 2 Make sure you are not in the radio mode and music or recordings is in stop or pause status. Device shows the recording state. 3 Press REC again to stop voice recording. Your voice recording will be saved on your device (filename = VOICE REC > MIC-xxx. wav; xxx = track number). Making FM recording*** 1 2 3 In the radio mode, tune to your preset station. Your FM recording will be saved on your device (filename = FM REC > FM-xxx. wav; xxx = track number). ***FM radio is only available to some regional versions. Playing recordings You can find your recordings in the RECORDINGS library or via Folder View(see related chapter). Searching for your desired recording 1 2 3 From the root menu, select RECORDING to enter the recording library. Your device will play all your recordings alphabetically in the recording library as you press 2;. Press 2; to pause the currently playing recording. Press )K for next or J( for previous recordings. TIP Playback of recordings functions the same way as in the MUSIC library. See MUSIC library: Playback for more information. 10 Customizing settings 1 2 3 4 Press MENU for settings options. Press + to scroll up or - to scroll down for your option. Press )K for next or J( for previous levels. Press MENU or J( to exit the existing settings screens. Setting TIP - Options for each setting are shown on the device display. - Available settings vary with selected mode. Options Off / Repeat 1 / Repeat all / Shuffle / Shuffle repeat / Repeat folder / Shuffle folder Rock / Funk / Jazz / Classic / Hip Hop / Dance / Custom / Off On / Off Normal / Slow / Fast Clock vertical / Clock horizontal / Animation 60 sec / 30 sec / 10 sec / Off 3 minutes / 5 minutes / 10 minutes / 30 minutes / Off 15 minutes / 30 minutes / 45 minutes / 60 minutes / Off On / Off Day and Time screens English / French / German / Spanish / Italian / Dutch / Portuguese Swedish / Polish FW version / Memory available Restore Factory settings Playmodes Equalizer Delete Power Save Scroll status Screen saver Display Time Time out Sleep timer Resume Set day and time Language Information Factory settings 11 About Firmware Manager Your device is controlled by an internal program called firmware. With Firmware Manager, you can update and restore your device with a few simple clicks. Install Firmware Manager 1 2 Insert the supplied CD into your computer'sCD-ROM drive. Follow screen instructions to begin and complete installation. Update and restore firmware 1 2 3 4 Insert the supplied CD into your computer's CD-ROM drive. Install Firmware Manager from the supplied CD to your computer. Follow on screen instructions to complete firmware restore. 12 Troubleshooting If a fault occurs, first check the points listed in the following pages. For further help and other troubleshooting tips, please also check out FAQs at www. philips. com/support. If you are unable to find a solution by following these hints, consult your dealer or service center. WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. Symptom Hang up Cannot power up Solution Press the reset button Connect your device to your computer and charge until the battery indicator stops blinking. In case of device error, connect your device to the computer. Use Firmware Manager to restore your device. [. . . ] If your: - internet connection is activated - your Firmware Manager has been installed on your PC - your device is connected and powered on then your Firmware Manager will pop-up a message if new firmware is available for your device Firmware Upgrade Your device is controlled by an internal program called firmware. You can install the latest firmware from the bypacked CD and download it from www. philips. com/support to keep your device updated. 1 2 3 4 TIP Please charge your device fully before firmware upgrade. This will ensure steady power supply for completing the whole process. Install the latest Philips Firmware Manager from the bypacked CD. Philips Firmware Manager will automatically notify you if any new updates are available. [. . . ]