User manual PHILIPS SATINELLE SOFT HP6408

[. . . ] Epilating with this new appliance leaves your skin smooth and hair-free for several weeks. This epilator comes with a massage attachment and an efficiency cap. The massage attachment helps to minimise the pulling sensation and gives you a more pleasant feeling during epilation. The massage attachment pivots for optimal contour following and can be easily detached for better cleaning. [. . . ] We advise you to epilate before you go to bed at night, as this allows any skin irritation that may develop to diminish overnight. English -  For optimal epilation results, the hairs should not be longer than 10mm. Use one of the following methods if the hairs are longer than 10mm: 1 Shorten the hairs to a maximum length of 10mm with a trimmer. Afterwards you can immediately start with epilation. Then you can start to epilate after a few days (minimum hair length 0. - As the hairs are removed by the root, epilation may cause some skin discomfort the first few times you use the epilator. This effect gradually diminishes when you use the appliance more often. Regrowth tends to be softer both in appearance and to the touch. Connecting the appliance 1 Insert the appliance plug into the appliance (Fig. 2 Insert the adapter into the wall socket. Epilating the legs If you are new to epilation, we advise you to start epilating with the pivoting massage attachment. Using the peeling glove Use the peeling glove in the shower. regular massages with the peeling glove may help to prevent ingrown hairs. Do not use the peeling glove immediately before or after epilation. English 11 Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Never rinse the appliance or the adapter under the tap (Fig. Keep the appliance and the adapter dry (Fig. Cleaning the attachments 1 Switch off the appliance. 2 Remove the adapter from the wall socket (1) and pull the appliance plug out of the appliance (2) (Fig. 3 Remove the attachment (efficiency cap or massage attachment) from the epilating head (Fig. 4 Remove loose hairs with the cleaning brush. 5 Rinse the attachment under the tap while turning it. [. . . ] Troubleshooting If the appliance does not work or does not work properly, first check the list below. If the problem is not mentioned in this list, the appliance probably has a defect. In that case we advise you to take the appliance to your dealer or to an authorised Philips service centre. Cause Solution You move the Move the appliance against the epilator in the direction of hair growth, with the on/ wrong direction. [. . . ]