User manual PHILIPS SBCBC8310

[. . . ] Remove the batteries from the speaker's battery compartment and disconnect the adapter from the mains if the system is not in use for a long period. Prevent fire or shock hazard: do not expose this equipment to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. Radio equipment for wireless audio applications is not protected against disturbance from other radio services. [. . . ] Do not use alkaline batteries as these may damage your FM wireless system!We have done our best to make the packaging easily separable into two materials: cardboard and polyethylene Your unit consists of materials which can be recycled if disassembled by a specialized company. Do not use alkaline batteries as these may damage your FM wireless system!2 Take out the batteries and dispose of them properly. 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. IMPORTANT Before using the FM speaker for the first time, please ensure that the batteries are fully charged for about 16 hours. This will guarantee a longer operating lifetime of the batteries. 2 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. You may hear a hissing sound through the speaker if the speaker is not yet properly tuned to the transmitter. 4 To tune, turn the tuning wheel until the signal is at its clearest. English Option 2 (figure 4) Connecting the FM transmitter to a line output of an audio source, e. ­ Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. You may hear a hissing sound through the speaker if the speaker is not yet properly tuned to the transmitter. 5 To tune, turn the tuning wheel until the signal is at its clearest. 6 In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level. 1 Switch on your audio source and carefully increase the volume of the audio source. [. . . ] ­ Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives as these may harm the housing. Continuous use at a high volume may permanently damage your hearing. Following this Directive, this product can be brought into service in the following states: R&TTE Directive 1999/5/EC B DK I E L S GR NL UK F A N This product complies with class 3 requirements as set down in ETS 300 445. [. . . ]