User manual PHILIPS SBCBM130

[. . . ] Remember that you can't get access to additional functions if these functions were not available on the original remote control of your equipment!SLEEP: to activate and vary the sleep timer (if available on your equipment). To put subtitling on your screen (if available on your equipment), or to switch teletext off. If you use the memory out key (fi) to access the next teletext page on your Philips TV, you can use the subtitle key to access. [. . . ] You do not know the brand of your equipment/you can not find the right code in the code list » auto search: 1 Press the mode selector key to select the device (TV, VCR, 2 Press and hold keys 1 and 3 simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on) Note the code inside the battery case and in the codelist in the centre of this booklet. This may be useful if you ever need to set up the SBC RU640 again. You used the auto search procedure or you forgot to note the code after set up?You can still `read out' the code from the remote: 1 Make sure you've selected the right mode with the mode selector key. 2 Press and release keys 1 and 6 simultaneously. Important: after pressing the keys, you have to release them immediately!4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 3-digit code. ) 5 Press key 2 and count the number of flashes for the second digit. 6 Press key 3 and count the number of flashes for the third digit. The back-lighting turns off if you don't move the remote control or if you don't press a key within 4 seconds. Instructions for use 5 Press the subtitle button (= the key under which you 6 Press Teletext on. The automatic back-lighting provides you with unparalleled ease of use, even in the most dimly-lit of rooms. While the remote control is actively being moved about the backlighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions below. to remove the back-lighting completely: · Press keys 7 and 9 simultaneously - for about 3 seconds until the green LED flashes twice. The back-lighting is now de-activated. Pressing keys 7 and 9 simultaneously again - for about 3 seconds -will return the back-lighting to its preset functional setting. You have now programmed the subtitle feature. [. . . ] You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. You can now enter all the keys (up to 8) that you want the SBC RU640 to transmit. 4 Press the Shift key for 3 seconds to indicate the end of a -When you want to add keys for another device to the macro, do not forget to select that device with the Mode key first! [. . . ]