User manual PHILIPS SBCBS030

[. . . ] Green Stop Play Blue Yellow To switch between one and two-digit channel selection and display. Number Keys: for direct channel selection and other functions. To switch between the external inputs of your equipment. Instructions for use 4 Press the power key to start the search. [. . . ] If response is not correct, repeat procedure beginning at step 1. Carefully read the complete procedure before starting!Please go back to step 1 and repeat the procedure, using the next 3-digit code in the list. - If no key is pressed within 30 seconds, you have to start again at step 1. Carefully read the complete procedure before starting!You do not know the brand of your equipment/you can not find the right code in the code list » auto search: 1 Press the mode selector key to select the device (TV, VCR 2 Press and hold keys 1 and 3 simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on) Note the code inside the battery case and in the codelist in the centre of this booklet. This may be useful if you ever need to set up the SBC RU630 again. You used the auto search procedure or you forgot to note the code after set up?You can still `read out' the code from the remote: 1 Make sure you've selected the right mode with the mode selector key. 2 Press and release keys 1 and 6 simultaneously. 2 Press and hold keys 1 and 6 simultaneously - for about 3 Seconds - until the green LED lights up. Don't forget to set up the SBC RU630 to operate this second TV. Press keys 1 and 9 simultaneously - for about 3 seconds until the green LED flashes twice. ­ The functional back-lighting is now de-activated and all keys light up when you pick up the remote control. Pressing keys 1 and 9 simultaneously again - for about 3 seconds - will return the back-lighting to its preset functional setting. The back-lighting turns off if you don't move the remote control or if you don't press a key within 4 seconds. You can't access teletext pages and you were used to use this (fi) button to access teletext. ­ Follow Set up procedure and at step 5 of section "Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly" press keys 0, 6 and 4. The SBC RU630 does not extend the capabilities of your TV!­ Press the subtitle key to turn teletext off. Having problems operating all the functions on your device. [. . . ] ­ While the remote control is actively being moved around the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. [. . . ]