User manual PHILIPS SBCHC410

[. . . ] Radio equipment for wireless audio applications is not protected against disturbance from other radio services. Wireless transmission The FM transmitter transmits the stereo audio signal from your audio or video source to your FM headphone without wires. Mute function Reduces the noise disturbance when the sound signal is too low or not available. Automatic power on/off indicator The FM transmitter automatically switches on and starts transmitting when audio signals are detected at the audio input (red LED). [. . . ] We have done our best to make the packaging easily separable into two materials: cardboard and polyethylene Your unit consists of materials which can be recycled if disassembled by a specialized company. Notes: Completely flat batteries need approximately 16 hours to recharge. The FM headphone will switch off automatically during recharging. Always remove the batteries if the headphone is not to be used for a long period of time. Using both audio inputs at the same time may damage your FM wireless system or your audio source!­ Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 4 In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level. You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 6 To tune, turn the tuning knob until the signal is at its clearest and the tuning indicator will light up. Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system!2 Take out the batteries and dispose of them properly. 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. 5 Put the earcushions back on the earshells. IMPORTANT Before using the FM headphone for the first time, please ensure that the batteries are fully charged for about 16 hours. This will guarantee a longer operating lifetime of the batteries. English 7 Adjust the volume to the desired level with the headphone volume control. Using both audio inputs at the same time may damage your FM wireless system or your audio source! 1 Connect the 2 RCA plugs of the stereo audio cable to the FM transmitter's audio input 2: ­ Check if the red RCA plug (right channel) is connected to the right channel (red) of the FM transmitter's audio input 2. ­ Check if the white RCA plug (left channel) is connected to the left channel (white) of the FM transmitter's audio input 2. [. . . ] ­ If the headphone will not be used for a long time, please remove the batteries to prevent leakage and corrosion. ⭠Only replace the batteries with LR03/AAA NiMH batteries (preferably Philips). ­ Do not leave the headphone near heat sources. Do not expose to direct sunlight, excessive dust, moisture, rain or any kind of mechanical shock. [. . . ]