User manual PHILIPS SBCRU110-00U

[. . . ] AT A GLANCE Once you've installed the batteries, this remote is ready to work with any Philips TV. For other brands of equipment, it needs to be set up first- see Getting Started. LED indicates proper operation Power switches TV on and off Mute switches TV sound on and off / 5 Channel Up changes to next channel / 1 Channel Down changes to previous channel / 2 The easiest way to find out how your new remote works, is to try pressing the keys and see what happens - don't worry, you won't damage anything!Most of the keys work just like on your original remote control. [. . . ] In the rare instance that none of the codes work, follow the instructions in the next section. Tip: Make a note of the code inside the battery case, and in the back of this booklet in case you ever need to setup again. If you don't know the brand of your equipment or if you can not find it in the codelist, setup still won't take long. philips' patented Handsfree autosearch tests all the codes one after another and finds the right one for you!The search time averages about 90 seconds. You will know when the correct code has been found because the equipment will switch off. 1 Press and hold s and y at the same time until the green LED lights up. Each time the green LED blinks, another code is sent. When the right code is found, the equipment switches off. 3 Immediately press y to stop the search. If you missed the correct code because the search went too far, switch the equipment back on, the press -P (down) to send the previous code again. Press -P (down) repeatedly until the equipment switches off again. 4 Once you've found the correct code, press The green LED blinks twice. Now, switch the equipment manually on again, then press a few keys on the remote to check that the equipment responds correctly. In the rare instance that it doesn't, try again from step 1 to find a better code. To save time if you ever need to setup again, make a note of the correct code inside the battery case and in the back of this booklet. In case you have forgotten to note the code you can still 'read out' the code from the remote. Here's how: 1 Press and release s and y at the same time; the green LED lights up. [. . . ] The model number of your Philips universal remote control is: SBC RU110 Date of purchase: ____/____/____ As you add new components to your home entertainment system, Philips again offers a universal remote control that will fit your new needs. Look for below unique full range of universal remote controls from Philips at a retailer near you. 410 422 430 440 : : : : 1 in 1 Universal 2 in 1 Universal 3 in 1 Universal 4 in 1 Universal audio 4 in 1 Universal second device 6 in 1 Universal TV Remote with digits and TXT Remote Control for TV and VCR Remote Control for TV, VCR and SAT/Cable Remote Control for TV, VCR, SAT/Cable and AUX for Remote Control for TV, VCR, SAT/Cable and AUX for Remote Control- Pre-programmed and Learnable Another very nice product from Philips is the Philips SBC LI510 Remote Control Extender Set, the wireless extension of your infra-red (IR) remote control!This system allows you to operate every IR driven equipment (i. [. . . ]