User manual PHILIPS SBCRU240

[. . . ] Carefully read the complete procedure before starting! Your equipment is a Philips brand: 1 Press the mode key for the device (TV, VCR, SAT or AUX) ­ The green indicator LED lights up to confirm transmission Press a few keys to check correct response. Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly: 1 Press the mode key for the device (TV, VCR, SAT or AUX) Make sure you choose the correct code list for your device!Press and hold keys 1 and 3 simultaneously - for about three seconds- until the green LED lights up. [. . . ] Carefully read the complete procedure before starting!Note the code inside the battery case and in the codelist of this booklet. This may be useful if you ever need to set up the SBC RU240 again. You used the auto search procedure or you forgot to note the code after set up?You can still `read out' the code from the remote: 1 Make sure you have selected the right mode with the mode selector key. 2 Press and release keys 1 and 6 simultaneously. Important: after pressing the keys, you have to release them immediately!4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 3-digit code. ) 5 Press key 2 and count the number of flashes for the second digit. 6 Press key 3 and count the number of flashes for the third digit. Carefully read the complete procedure before starting!With the mode selector it is possible to select 4 categories of devices you want to operate. Each category (TV, VCR, SAT and AUX) is meant to operate a specific group of equipment: TV tv VCR vcr SAT sat cable AUX vcr Once you have programmed the functions of a device in one of the categories, it is not possible to program another device in the same category. There is, however, a solution in case you want to program two devices in the same category (2 TV's, VCR's, etc. EXAMPLE: The AUX mode on this remote control is factory preset to control many Philips VCR's. You can change the AUX mode (or any mode) to operate another type of device. The following example shows you how to use the AUX mode to operate a second TV: 1 Press the AUX key and make sure the second TV is switched on. 2 Press and hold keys 1 and 6 simultaneously - for about 3 Seconds - until the green LED lights up. Don't forget to set up the SBC RU240 to operate this second TV. Punch-through sound enables you to control the audio level of your first or second TV, regardless of what device mode the remote control is in. eXAMPLE: You have installed a second TV under AUX mode. [. . . ] If you have any questions about the SBC RU240, please call our help-line for assistance!You can find the number in the code list section of this booklet. Before you call, please read this manual carefully. You will be able to solve most of your problems. [. . . ]