User manual PHILIPS SBCRU410

[. . . ] AT A GLANCE Once you've installed the batteries, this remote is ready to work with any Philips TV. For other brands of equipment, it needs to be set up first- see Getting Started. Power switches TV on and off Mute switches TV sound on and off Channel Up/Down changes to next/previous channel Shift: hold this key while pressing other keys to access additional functions (if available on your equipment). For instance: - Shift - P+: brightness+/menu up - Shift - P- : brightness-/menu down - Shift - vol+: colour+/menu right - Shift - vol-: colour-/menu left - Shift -7: teletext on - Shift -9: teletext off Try the other shift keys on your equipment to discover which functions are available The easiest way to find out how your new remote works, is to try pressing the keys and see what happens - don't worry, you won't damage anything! [. . . ] If it doesn't, try again using the next code in the list. In the rare instance that none of the codes work, follow the instructions in the next section. Tip: Make a note of the code inside the battery case, and in the back of this booklet in case you ever need to setup again. If you don't know the brand of your equipment or if you can not find it in the codelist, setup still won't take long. philips' patented Handsfree autosearch tests all the codes one after another and finds the right one for you!The search time averages about 90 seconds. (Maximum search time is 5 minutes for TV) Make sure the TV is switched on. You will know when the correct code has been found because the equipment will switch off. 1 Press and hold 1 and 3 at the same time until the green LED lights up. Each time the green LED blinks, another code is sent. When the right code is found, the equipment switches off. If you missed the correct code because the search went too far, switch the equipment back on, then press P (down) to send the previous code again. Press P (down) repeatedly until the equipment switches off again. 4 Once you've found the correct code, press The green LED blinks twice. Now, switch the equipment manually on again, then press a few keys on the remote to check that the equipment responds correctly. In the rare instance that it doesn't, try again from step 1 to find a better code. To save time if you ever need to setup again, make a note of the correct code inside the battery case and in the back of this booklet. In case you have forgotten to note the code you can still 'read out' the code from the remote. [. . . ] Look for below unique full range of universal remote controls from Philips at a retailer near you. RU RU RU RU 110 422 430 440 : ; ; ; Universal easy TV zapper 2 in 1 Universal Remote Control 3 in 1 Universal Remote Control 4 in 1 Universal Remote Control AUX for audio 4 in 1 Universal Remote Control AUX for second device 6 in 1 Universal Remote Control Learnable Another very nice product from Philips is the Philips SBC LI510 Remote Control Extender Set, the wireless extension of your infra-red (IR) remote control!This system allows you to operate every IR driven equipment (i. Sat-receivers, VCRs or Hi-Fi-sets) from anywhere in or around the house. [. . . ]