User manual PHILIPS SBCRU460

[. . . ] Power switches your device off (and on, if so on your original remote) Mode Selector selects whether you are operating the TV, VCR, SAT/CBL, CD, AUDIO1 or AUDIO2 Menu switches menu on (and off, if so on your original remote) Mute switches sound on and off Channel Up changes to next channel Volume Up turns volume up Channel Down changes to previous channel Volume Down turns volume down Keypad for direct channel selection and other functions Shift: hold this key while pressing other keys to access additional functions (if available on your equipment). For instance: Shift - P+: brightness+/menu up Shift - P- : brightness-/menu down Shift - volume +: colour+/menu right Shift - volume -: colour-/menu left Try these and other combinations on your equipment to discover which functions are available 1/2 Digits switches between one and two-digit channel selection and display for TV FastText for VCR red Rewind green Stop yellow Play blue Forward white Pause Record Teletext Off switches Teletext off Teletext Hold keeps the current Teletext page on screen Backlighting switches the keypad backlighting on and off; it will stay on for four seconds after the last key press. The easiest way to find out how your new remote works, is to try pressing the keys and see what happens - don't worry, you won't damage anything!Most of the keys work just like on your original remote control. [. . . ] 3 Press 1 and count the number of times the green LED blinks. This is the first digit of the 3-digit code. ) Press 2 and count the number of blinks for the second digit. Press 3 and count the number of blinks for the third digit. COPY (LEARN) CODES FROM YOUR ORIGINAL REMOTE CONTROL If your equipment is not included in the codelist, or if specific codes on your remote control are missing, the RU460 has the solution. It can copy and replicate up to 100 codes from your original remote controls. Before you start, make sure you're in the mode you're setting up (TV, VCR, SAT/CBL, CD, AUDIO1, AUDIO2). The green indicator LED shows which mode is selected. To switch between modes, press once to activate, then press it again to advance to the next mode. NOTE: The RU460 can be programmed entirely to your needs. With the RU460 you can copy functions from any combination of devices, and allocate them to any mode you want. You can for instance copy functions from the remote control of your second VCR under AUDIO2, or you can copy functions from your DVD remote control under SAT/CBL. Place the top of your original remote control so that it's facing the infrared sensor window of the RU460. place both remote controls on a flat surface and 3-8 centimeters apart. Make sure that both 3-8 remote controls have fresh batteries. To copy codes from your original remote control Press and hold 4 and 6 at the same time -for about 3 secondsuntil the green LED on the RU460 lights up. (Release the keys, the green LED should stay on) 1 Press a key on the RU460 that you want to copy a function of your original remote under, the green LED blinks once, indicating that the RU460 is ready to receive a signal. 2 Press and hold the key on your original remote control that you want to copy to the RU460, until the green LED on the RU460 blinks three times and stays off. Release the key, the function for the selected key has now been copied. You've now copied a function in the RU460, this key is now ready to transmit the same function as your original remote control. If you want to copy more functions from your original remote control, start again from step 1. Tip: Choose keys that correspond with the keys on your original remote control, so that you can remember them easily. [. . . ] When the right code is found, the second TV switches off. 4 Immediately press to stop the search. This system allows you to operate every IR driven equipment (i. Sat-receivers, VCRs or Hi-Fi-sets) from anywhere in or around the house. [. . . ]