User manual PHILIPS SBCRU510-00U

[. . . ] If the TV does not respond at all or not to all of the key commands, follow the instructions under `Setting the remote control'. This is only necessary if your TV does not respond to the RU510. If that is the case, the RU510 does not recognize the brand and/or model of your TV and you need to program the remote control to do so. The example belowinstructs you how to do this. [. . . ] If this is not the case, you can redo the automatic setting. The RU510 will then search for a code that perhaps works better. After the RU510 has run through all the known codes, the search will stop automatically and the green LED will stop flashing. The illustration on page 3 gives an overview of all keys and their functions. Direct choice of channels and other functions. When pressed at the same time as a second key, the second key will get another function. 'menu left' Tr y out other combinations with the Shift-key on your appliance in order to find out which functions are available. Only functions featured on the original remote control are available. Switches between external inputs of your equipment. Teletext keys If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the OK key for this. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. It is possible that you must enter another code for the device. If you want to add a function to the RU510, you can contact the Philips service line for Universal Remote Control to ask for the 3-figure code for the extra function. Simultaneously for three seconds, until the green LED flashes twice and then remains lit. Enter the 3-figure code which you received from the service line within thirty seconds. Press the key under which you want to store the new function. If you want to store the function under Shift in combination with another key, first press the Shift key and then press the required function key. For restoring the original function of the key, see `Restoring the original functions of your remote control'. Restoring the original functions of your remote control 1 Keep keys 1 and 6 on the RU510 Pressed simultaneously for three seconds, until the green light flashes twice and then remains lit. All original functions have now been restored and any extra functions have been deleted. ­ Problem Solution The TV does not respond and the green LED does not flash when you press a key. Replace the old batteries with two new 1. [. . . ] If you have any questions about the RU510, call our special helpline. You will find the telephone number after the code list at the back of this manual. Read this manual carefully before you make a call. You can solve most of the problems yourself. [. . . ]