User manual PHILIPS SBCRU520-00B

[. . . ] If no green light appears, check whether the batteries are properly inserted (see `Inserting the batteries'). 3 Check whether all the keys are working. For an overview of the keys and their functions see `3. ­ If the TV responds as it should to all of the key commands the RU520 is ready for use. [. . . ] After the RU520 has run through all the known codes, the search will stop automatically and the green light will stop flashing. The illustration on page 3 gives an overview of all keys and their functions. Direct choice of channels and other functions. When pressed at the same time as a second key, the second key will get another function. 'menu left' Tr y out other combinations with the Shift-key on your appliance in order to find out which functions are available. Only functions featured on the original remote control are available. - green teletext key - stop (VCR/DVD) 0 0 . - yellow teletext key - pause (VCR/DVD) @ 6 . - blue teletext key - wind (VCR/DVD) # 2 . - white teletext key - index - play (VCR/DVD) $ / . Switches between external inputs of your equipment. TV: teletext keys SAT: teletext, Info, Guide, Subtitle DVD: audio menu, Angle, Subtitle VCR: timer, Showview If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the STOP key for this. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. It is possible that you must enter another code for the device. You can select the device you wish to operate with the Mode selector. each option allows operation of one device only. If desired, you can program the Mode selector to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the VCR/DVD mode for a second TV. Then keep 1 and 6 on the RU520 pressed simultaneously for three seconds, until the green light under VCR/DVD in the selector window lights up. VCR/DVD will now allow you to operate your second TV. If you want to add a function to the RU520, you can contact the Philips service line for Universal Remote Control to ask for the 3-figure code for the extra function. [. . . ] You will find the telephone number after the code list at the back of this manual. Read this manual carefully before you make a call. You can solve most of the problems yourself. If you cannot find any answers to your problems, write down the details of your device shown in the code list at the back of this manual. [. . . ]