User manual PHILIPS SBCRU620

[. . . ] ⷠWhile the remote control is actively being moved about, the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. [. . . ] 2 Press and release keys 1 and 6 simultaneously. Important: after pressing the keys, you have to release them immediately!4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 3-digit code. ) 5 Press key 2 and count the number of flashes for the second digit. 6 Press key 3 and count the number of flashes for the third digit. Please go back to step 1 and repeat the procedure, using the next 3-digit code in the list. - If no key is pressed within 30 seconds, you have to start again at step 1. Carefully read the complete procedure before starting!You do not know the brand of your equipment/you can not find the right code in the code list » auto search: 1 Press the mode selector key to select the device (TV or Press and hold keys 1 and 3 simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on) Device is not responding and the green light does not flash when you press a button. ­ Replace batteries with two new 1. Device is not responding, but the green light does flash when you press a button. ­ Aim the SBC RU620 at the device and be sure that there are no obstructions between the SBC RU620 and the device. ­ You may be using the wrong code. Try repeating Set up using another code, listed under your brand, or start the Autosearch Set-up over again to locate the proper code. If the device still doesn't respond, call the help-line and we'll put you back on track. ­ While the remote control is actively being moved around the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. ⷠYou can't access teletext pages and you were used to use this (fi) button to access teletext. [. . . ] If you have any questions about the SBC RU620, please call our help-line for assistance!You can find the number in the code list section of this booklet. Before you call, please read this manual carefully. You will be able to solve most of your problems. [. . . ]