User manual PHILIPS SBCRU630

[. . . ] While the remote control is actively being moved about, the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. [. . . ] Important: after pressing the keys, you have to release them immediately!4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the 3-digit code. ) 5 Press key 2 and count the number of flashes for the second digit. 6 Press key 3 and count the number of flashes for the third digit. English Punch-through sound enables you to control the audio level of your first or second TV, regardless of what device mode the remote control is in. eXAMPLE: You have installed a second TV under SAT mode. You can control that TV's volume when you are in VCR mode. This feature is installed as a default setting for a first TV. To install this feature for a second TV: 1 Press the mode selector key to select VCR. Carefully read the complete procedure before starting!With the mode selector it is possible to select 3 categories of devices you want to operate. Each category (TV, VCR and SAT) is meant to operate a specific group of equipment: TV tv VCR vcr SAT sat cable 2 Press and hold keys 1 and 6 simultaneously -for about 3 Seconds - until the green LED lights up. Once you have programmed the functions of a device in one of the categories, it is not possible to program another device in the same category. There is, however, a solution in case you want to program two devices in the same category (2 TV's, VCR's, etc. EXAMPLE: The SAT mode on this remote control is factory preset to control many Philips satellite receivers. You can change the SAT mode (or any mode) to operate another type of device. The following example shows you how to use the SAT mode to operate a second TV: 1 Press the mode selector key to select SAT and make sure the second TV is switched on. The Volume up/down keys now control the volume of your second (SAT) TV when you're in VCR mode. When you pick up the SBC RU630 and tilt it over about 60 degrees, the main keys for the device you want to operate are automatically back-lit. In VCR mode for example, only the main keys that are needed to operate the VCR are back-lit. You can choose to have all of the keys back-lit, or you can switch off the functional back-lighting feature completely. [. . . ] If you have any questions about the SBC RU630, please call our help-line for assistance!You can find the number in the code list section of this booklet. Before you call, please read this manual carefully. You will be able to solve most of your problems. [. . . ]