User manual PHILIPS SBCRU640/87U

[. . . ] You just made a great choice by buying this Philips universal remote control!It takes the place of as many as four separate remote controls and can operate the most-used functions of almost any brand of TV, VCR, satellite tuner/cable decoder and AUDIO equipment. SHIFT: to get access to additional functions (press together with other function keys). Depending on the age of your equipment, the result is for example: SHIFT + PROG+: increases brightness or menu up function SHIFT + PROG-: decreases brightness or menu down function SHIFT + VOL+: increases colour or menu right function SHIFT + VOL-: decreases colour or menu left function Try other shift/key combinations on your equipment to discover which functions are available. [. . . ] English Punch-through sound enables you to control the audio level of your first or second TV, regardless of what device mode the remote control is in. eXAMPLE: You have installed a second TV under SAT mode. You can control that TV's volume when you are in VCR mode. This feature is installed as a default setting for a first TV. To install this feature for a second TV: 1 Press the mode selector key to select VCR. Carefully read the complete procedure before starting!With the mode selector it is possible to select 4 categories of devices you want to operate. Each category (TV, VCR, SAT and AUDIO) is meant to operate a specific group of equipment: TV tv VCR vcr laserdisc dvd SAT sat cable AUDIO CD 2 Press and hold keys 1 and 6 simultaneously -for about 3 Seconds - until the green LED lights up. Once you have programmed the functions of a device in one of the categories, it is not possible to program another device in the same category. There is, however, a solution in case you want to program two devices in the same category (2 TV's, VCR's, etc. EXAMPLE: The SAT mode on this remote control is factory preset to control many Philips satellite receivers. You can change the SAT mode (or any mode) to operate another type of device. The following example shows you how to use the SAT mode to operate a second TV: 1 Press the mode selector key to select SAT and make sure the second TV is switched on. The Volume up/down keys now control the volume of your second (SAT) TV when you're in VCR mode. When you pick up the SBC RU640 and tilt it over about 60 degrees, the main keys for the device you want to operate are automatically back-lit. In VCR mode for example, only the main keys that are needed to operate the VCR are back-lit. You can choose to have all of the keys back-lit, or you can switch off the functional back-lighting feature completely. 2 Press and hold keys 1 and 6 simultaneously - for about 3 Seconds - until the green LED lights up. Don't forget to set up the SBC RU640 to operate this second TV. Press keys 1 and 9 simultaneously - for about 3 seconds until the green LED flashes twice. ­ The functional back-lighting is now de-activated and all keys light up when you pick up the remote control. Pressing keys 1 and 9 simultaneously again - for about 3 seconds - will return the back-lighting to its preset functional setting. [. . . ] -The key you select to program the macro under loses its original function. If you have Teletext on your TV, it is possible to watch some TV programs with subtitles. this is an additional Teletext feature. If your TV is equipped with Teletext, you can program this subtitle function in your remote: 1 Select your favourite channel. [. . . ]