User manual PHILIPS SBCRU865

[. . . ] You have made a great choice by buying this Philips universal remote control!It replaces up to six separate remote controls and is pre-programmed to operate with almost any brand of TV, VCR, satellite tuner, cable decoder, CD-player, DVD-player, tuner, amplifier and home cinema system. It can even learn the codes of other remote control units that are not pre-programmed. Best of all, the SBC RU865 is quick to set up and easy to use, and with the back-lighting of the display, it can even be used in dimly lit rooms! [. . . ] Place your original remote control facing the infra-red sensor window of the SBC RU865. place both remote controls on a flat surface , 3-8 centimetres apart. Make sure that both remote controls have new batteries. 1 Press and hold SETUP until SETUP lights up in the display. TV (for example - second line) The SBC RU865 is now in learning mode and the LCD displays the selected equipment. (The keys below the part-line, Standby key, and the SMART CONTROLS are learnable. ) ORIGIN (second line) Press the key on the original remote control you want to learn from. You have learned your SBC RU 865 a new code. If you want to copy more functions from your original remote control, start again from step 7. Tip: Choose keys that correspond with the keys on your original remote control, so that you can remember them easily. If the SBC RU865 displays ERROR for a second, followed by ORIGIN the SBC RU865 did not receive the signal correctly. In this case you should: · Vary the distance slightly between both remote controls and try again from step 1 (try this several times). This time you should press and immediately release the function key on your original remote control. The LCD should display STORED, indicating that the RU865 received the signal. Make sure that both remote controls have new batteries. Try to copy your codes under different lighting conditions. Light from TL-tubes may influence the signal you are copying. The SBC RU865 is designed and tested extensively and is ready to copy almost all infrared remote control signals. In some rare instances manufacturers use infra-red signals that cannot be copied to any remote control. You should of course always try the Autosearch to see if such a code is included in our pre-programmed library. It is possible to copy key functions from keys in one device mode (e. TV mode) to keys in another device mode (e. [. . . ] Home Cinema is an integrated A/V system that offers the best in sound and vision entertainment. To control more devices of your Home Cinema system with your remote control, the SBC RU865 features the Home Cinema mode. Note:You should only program the SBC RU865's CINEMA key after you have programmed all the rest of your devices. the SBC RU865 is already factory preset to operate TVs , VCRs , DVD and Amplifiers under CINEMA. [. . . ]