User manual PHILIPS SBCRU885

[. . . ] You have made a great choice by buying this Philips universal remote control!It replaces up to eight separate remote controls and is pre-programmed to operate with almost any brand of TV, VCR, satellite tuner, cable decoder, CD-player, DVD-player, tuner, amplifier and home cinema system. It can even learn the codes of other remote control units that are not pre-programmed. Best of all, the SBC RU885 is quick to set up and easy to use and with the back-lighting of keys and display, it can even be used in the dark! [. . . ] If the SBC RU885 displays ERROR for a second, followed by ORIGIN the SBC RU885 did not receive the signal correctly. In this case you should: · Vary the distance slightly between both remote controls and try again from step 1 (try this several times). This time you should press and immediately release the function key on your original remote control. The LCD should display STORED, indicating that the RU885 received the signal. Make sure that both remote controls have new batteries. Try to copy your codes under different lighting conditions. Light from TL-tubes may influence the signal you are copying. The SBC RU885 is designed and tested extensively and is ready to copy almost all infrared remote control signals. In some rare instances manufacturers use infra-red signals that cannot be copied to any remote control. You should of course always try the Autosearch to see if such a code is included in our pre-programmed library. It is possible to copy key functions from keys in one device mode (e. TV mode) to keys in another device mode (e. DVD mode) so you can operate different devices without changing mode. For example: you can put the TV in Standby while being in DVD mode. 1 Press and hold SETUP until SETUP lights up in the display. FROM (first line) Use SMART CONTROLS to select the device you wish to copy key functions from. TV (for example - second line) Confirm with SEND. (The keys below the part-line, Standby key, and the SMART CONTROLS can be copied. 8 TO (first line) Use SMART CONTROLS to select the device you want to copy the key function to. DVD (for example - second line) Confirm with SEND. With a macro key you can operate a series of functions by pressing one single key. 1 Press and hold SETUP until SETUP lights up in the display. [. . . ] If you have questions about the SBC RU885, please call our help-line or send an e-mail for assistance!You can find the number/address in the code list section of this booklet. Before you call or send an e-mail, please read this manual carefully. You will be able to solve most of your problems. [. . . ]