User manual PHILIPS SBCRU940

[. . . ] Charging the Remote Control Getting Started 1. Adjusting the Settings Getting the Maximum out of it 1. Recharging Problems FAQ Overview of Symbols Specifications Index 2 2 3 6 6 7 8 10 13 13 15 18 20 22 24 29 32 32 32 34 35 37 39 40 User Guide 1 Introduction 1. Intelligent Remote Control The intelligent Remote Control can be used for all devices that understand infrared remote control signals. [. . . ] You can customize it later. The Remote Control gives you the possibility to add the device with or without RC-codes. s s Create with RC-codes: Choose this option if you think the new device understands RC-codes. The new device is added with operational buttons. Don't add RC codes: If you choose this option, the new device is added without operational buttons. You can program them as explained in "Programming control panel buttons" on page 16. 4 Tap the button of your choice. The new device is automatically displayed in Use mode. Moving menu items You can change the order of Device menu items and Macro menu items. Changes you make in the Device menu are automatically updated in the Home menu. The device or macro tab is active when the name of a device or macro is displayed. 2 Switch to Move mode via the Mode button The Remote Control displays the menu. The menu item is highlighted. User Guide 21 . Getting the maximum out of it 4 Use the Left and Right button to move the menu item up or down. You return to Use mode. 5. Deleting and Restoring Deleting You can delete control panel buttons and actions associated with a direct-access or a Left/Right button. You can also delete Device menu items and Macro menu items. Home menu buttons cannot be deleted directly. You have to delete them via the Device menu. Deleting a button or button action Note Borderless buttonscannot be deleted. You can only hide them by removing their label (see "Labeling a button" on page 18). 1 Switch to Delete mode via the Mode button 2 Tap the button you want to delete. The result depends on the element you are deleting: s s s . Control panel button: The button disappears from the display. Left or Right button command: The corresponding label disappears from the display. Direct-access button: The button becomes inactive. User Guide 22 Getting the maximum out of it 4 Delete all the items you want and return to Use mode via the Mode button. Deleting a device or macro menu item 1 Switch to Delete mode via the Mode button . 2 Navigate to the menu item you want to delete. If you have opened the Device menu, the Left button label changes into Device and the Right button label into Action. If you have opened the Macro menu, the Left and Right button labels change into Group. 3 Press and hold down the Left or Right button depending on what you are deleting: s Left button labeled Device: For deleting a device in the Device menu. s Right button labeled Action: For deleting an action from an item in the Device menu. s Left button labeled Group: For deleting a macro group. [. . . ] s Make sure the Remote Control lies properly on the dock. s Make sure the battery pack is installed properly in your Remote Control (see p. 4). User Guide 34 FAQ Can I program a button to execute more than one command?However, you can create a macro to execute a sequence of commands (see p. [. . . ]