User manual PHILIPS SBCRU980

[. . . ] Safety & Regulations Regulations according to R&TTE English Hereby, Philips Consumer Electronics, Remote Control Systems, declares that this ProntoPro NG is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Philips Consumer Electronics, Remote Control Systems vakuuttaa täten että ProntoPro NG tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Hierbij verklaart, Philips Consumer Electronics, Remote Control Systems dat het toestel ProntoPro NG in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Par la présente, Philips Consumer Electronics, Remote Control Systems, déclare que l'appareil ProntoPro NG est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. [. . . ] It implies that when you press one of the 4 firm keys, the LCD backlight will be activated. The ProntoPro NG will not send out an IR code nor perform the button action. User Guide 36 Customising ProntoPro NG Adjusting the Cursor Keys Settings You can set the cursor keys settings to 3 different states. For more information on the cursor keys, see `Operating ProntoPro NG with the Cursor' on page 48. To adjust the cursor keys settings of the ProntoPro NG, tap in the third Settings Page. You can now toggle between the following 3 cursor keys states: : This setting implies that when you press one of the cursor keys, the LCD backlight will be activated. The ProntoPro NG will not send out an IR code nor perform the button action. : This setting implies that when you press one of the cursor keys, your ProntoPro NG will send out the IR code or perform the action assigned to this key. The LCD backlight will not be activated when pressing a cursor key. : This is the default setting of your ProntoPro NG. It implies that when you press one of cursor keys, the LCD backlight will be activated and your ProntoPro NG will send out the IR code or perform the action assigned to this key. Adjusting the Pickup Sensor Settings You can set the pickup sensor settings of your ProntoPro NG to 2 different states. This implies that you can choose whether or not the backlight should be activated when tilting your ProntoPro NG. To adjust the pickup sensor settings, tap in the third Settings Page. You can now toggle between the following 2 states: Pickup sensor-Off: This setting deactivates the LCD backlight when tilting the ProntoPro NG. Pickup sensor-On: This is the default setting. It activates the LCD backlight when tilting the ProntoPro NG. User Guide 37 EN Using the Power Features Creating and Editing Macros A macro allows you to send a sequence of commands when tapping one single button. You can for instance switch on your TV, turn on a movie channel and prepare your VCR for recording by rewinding the videotape. The action list can be created and edited in the Macro Tool. Note Once you have programmed a macro, the button actions will not be changed when you select another brand in the Brand Tool. In the Macro Tool you first have to select the button that will contain the macro, also called the target button. Then, one by one, you create an action list by adding actions to this target button. You can do this by: Selecting another button and adding its actions to the action list of your target button. After creating the macro, all actions you added to the action list are executed when you tap the button. Creating a Macro 1 Tap and hold the ProntoPro NG icon in the upper left corner of the touch screen for 3 seconds. 4 Navigate to the Device and the Page that contains the target button you want to use for a macro. 5 Tap the button you want to select as a target button. [. . . ] When you switch from using the ProntoPro NG to the Tools Menu, the ProntoPro NG icon shifts at the top area of the touch screen. A page of a device is the area of 320 by 240 pixels on ProntoPro NG's touch screen containing buttons or other objects. Device template Firm key Hard button IR IR code Label LCD LCD backlight Link Macro Mode animation Page User Guide 66 Glossary Page animation When you switch from one page to another, the first page slides out of the screen and the second page slides in the screen. ProntoPro NG is a universal remote control with a touch screen. You can customise and fully configure ProntoPro NG to your personal needs: the devices you want to operate, the functions you want to perform and the layout on ProntoPro NG. [. . . ]