User manual PHILIPS SBCSC205

[. . . ] With the clickstep control you can always set the correct food temperature. These instructions apply to two Philips Baby Bottle Warmer models: - Model SBC SC205: For use at home - Model SBC SC215: For use at home and in the car (with car adapter) Please read these instructions carefully and retain them for future reference. Important Safeguards Read and save these instructions Never use the unit without water in it. Do not immerse appliance, cord or plugs in water or other liquid. [. . . ] The indicator lamp then switches on and off intermittently to indicate the thermostat is controlling the temperature of the water. ⷠWhen the indicator lamp goes out, remove the bottle from the container and turn the control knob to the " " (off) position. ⷠShake the bottle a little to distribute the heat evenly before you allow your baby to drink. Warning: ­ always check that the contents of the bottle are at the correct temperature by pouring a few drops on the back of your hand. ­ do not leave the bottle in the warmer after the indicator lamp has gone out as this could cause overheating of the milk. the heating of baby food depends on the amount and consistency of the food. The three symbols represent the warming of 50-110, 110-180, and 180-250ml milk respectively. The effect of the initial temperature of the food and water is so small your baby usually won't notice it. Place the jar in the container (7) using the lifter and fill the space between the jar and the inner container with water up to two centimetres from the rim (6). For small jars fill-up to just below the top of the jar. Use the lifter to stir the contents of the jar frequently for more rapid distribution of heat. After a few minutes the food will have reached just the right temperature for your baby. When the indicator lamp goes out, remove the jar from the container and turn the control knob to the " " (off) position. Warning: ­ always check that the contents of the jar are at the correct temperature by testing some on the back of your hand. With the Baby Bottle Warmer you can also keep the bottles and jars warm for a short time. For microbiological and hygienic reasons baby food should never be kept warm for longer than one hour. For quickly warming up baby food jars, set the click-step control knob to the " " symbol. Because the car battery is now being used instead of the mains supply, the time required for warming up may be slightly longer. Note that prolonged use of the Baby Bottle Warmer (several hours) can weaken your car battery. Warning: ­ never use the Baby Bottle Warmer when the car is in motion. [. . . ] Wait 15 minutes between consecutive uses to allow the safety cut-out to reset. This is normal; it may turn on or off while heating. Indicator light switches on and off while keeping warm. Shield indicator from ambient light to improve visibility. [. . . ]