User manual PHILIPS SBCSC362

[. . . ] You have just purchased a truly cordless Baby phone (SBC SC362) that enables you to monitor your child from wherever you are in and around your house. The Baby phone has been tested to meet all necessary regulations and standards, and features a battery back-up option that guarantees operation at all times. Note: While the Baby phone is intended as an aid, it is not a replacement for real parent supervision and should not be used as such. [. . . ] Place the `baby unit' near the baby's bed, making sure that the microphone is placed in the best position for picking up baby's sounds. Move the `parent unit' closer to the `baby unit' to restore sound reception again. Make sure that the `baby unit' is always out of reach of the baby; never place the `baby unit' inside baby's bed or playpen!­ If sound is picked up by the built-in microphone, the `baby unit' starts transmitting automatically. The transmission stops when no sound is picked up any more. During transmission the green TRANSMIT LED lights up. This function operates both during VOICE and OFF-mode. for manual transmission: · Keep the TALK button pressed and speak into the microphone. ­ Both the red POWER LED and green TRANSMIT LED light up. ­ Spoken sound is transmitted until the TALK button is released. `Parent unit' · Make sure that the mains power adapter is connected correctly, or that batteries are installed. ­ If mains power adapter is connected correctly, the red adapter LED on the standing base lights up. ­ If batteries are installed, the `parent unit' only uses battery power in the event of a mains failure, or when the unit is not placed inside the standing base. Place the `parent unit' inside the standing base, near to the parent's location. ­ If a sound signal is received from the `baby unit', it is heard via the built-in speaker. ­ Do not place `baby unit' and `parent unit' too close to each other while operating. [. . . ] The unit can be carried in and around the house, using the easy belt-clip. This clip can easily be attached to and removed from the `parent unit' (fig. Anslut en av de medföljande nätadaptrarna till Babyns enhet och den andra till den ställbara basen på Föräldrarnas enhet (fig. [. . . ]