User manual PHILIPS SBCSC463

[. . . ] Baby unit DC power supply socket power button power light channel selection switch microphone AC power adapter microphone sensitivity control battery compartment cover Parent unit system check light DC power supply socket AC power adapter power light volume control - on/off switch channel selection switch loudspeaker battery compartment cover system check alarm switch Please read this guide carefully before using the baby monitor, and keep it for future reference. this baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. Make sure the Baby unit and adapter cable are always out of reach of the baby, at least one metre away. [. . . ] Adjust the microphone sensitivity of the Baby unit to a level you prefer (using your own voice as a sound reference). > The power light lights (yellow) when a sound is picked up. Please read this guide carefully before using the baby monitor, and keep it for future reference. this baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. Make sure the Baby unit and adapter cable are always out of reach of the baby, at least one metre away. Never place the Baby unit inside the baby's bed or playpen!Clean the baby monitor with a damp cloth. Switch the Parent unit on and adjust the volume to level you prefer using the VOLUME ON/OFF control. The SYSTEM CHECK light lights continuously (green) when the Parent unit and Baby unit are in touch with each other. If there is interference or if sound reception is poor, switch both units to another channel. Always make sure that the channel selection switches on both units are set to the same position. Using batteries Operating the Baby unit cordlessly Checking that the units are in touch Check that the SYSTEM CHECK light on the Parent unit lights continuously (green) to confirm that the connection between both units is reliable. If the light flashes (red), move the Parent unit closer to the Baby unit. The light flashes if the units are out of range for more than 30 seconds or if there is interference. Put the cover back in place and secure using a coin. > If the power light flashes (red) install new batteries. The unit operates for up to 30 hours on batteries. You can switch on the system check alarm on the Parent unit that beeps when the units are not in touch. The Parent unit is delivered with the system check alarm switched off. [. . . ] Power adapter is not plugged in or batteries are exhausted. Mobile or cordless phones too close Move phones away from the units. Both systems are operating on the same frequency. Units are out of range or there is interference from another FM source. [. . . ]