User manual PHILIPS SCD520

[. . . ] Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. This Philips AVENT baby monitor provides round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. The DECT technology guarantees zero interference from other wireless appliances and a crystal clear signal between the baby unit and the parent unit. [. . . ] Note: Menu functions can only be operated when a connection has been established between the baby unit and the parent unit. , The new setting flashes twice and then disappears from the display. If the nightlight is off, the display shows `On?Press the + button once or several times to select one of the five lullabies from the list or to select `Play All'. When you have selected one of the five lullabies, it plays continuously. Switching to another lullaby 1 Press the + button to choose another lullaby from the list. Note:The arrow indicates in which direction you can navigate. If you do not continue the lullaby within 20 seconds, the lullaby function switches off automatically. You can set the microphone sensitivity of the baby unit to the desired level. You can only change the microphone sensitivity when a connection between the baby unit and the parent unit has been established, i. When the LINK light on the parent unit lights up green continuously. Select the desired microphone sensitivity level for the baby unit with the + and - buttons. , k = minimum sensitivity level , l = maximum sensitivity level Press the OK button to confirm. Note:When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. as a result , the units consume more power. Sound alert on/off Note:You can only switch the sound alert on and off in the menu of the parent unit. 5 If the alert is off, the display shows `On?Reset function This function in the menu of the parent unit allows you to reset both the parent unit and the baby unit to the default settings at the same time. You can use this function if problems occur that you cannot solve by following the suggestions in chapter `Frequently asked questions'. Default settings Parent unit - Loudspeaker volume: 1 - Microphone sensitivity: 3 - Sound alert: off - Temperature alert: off - `Temperature low' alert: 14°C - `Temperature high' alert: 30°C Baby unit - Loudspeaker volume: 3 - Nightlight: off - Lullaby: 1 , The parent unit switches off and then switches on again. , The units have now both been reset to the default factory settings. Accessories Belt clip and neck strap If the batteries of the parent unit are sufficiently charged, you can take the unit with you inside and outside the house if you attach the unit to your belt or waistband with the belt clip or if you hang it around your neck with the neck strap. [. . . ] the specified operating range of the baby monitor is 330 metres/1000 feet. Why does my baby monitor manage a much smaller distance than that?Why is the connection lost every now and then?The parent unit may be switched on during charging. [. . . ]