User manual PHILIPS SCD-535

[. . . ] Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. This Philips AVENT baby monitor provides round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. The DECT technology guarantees zero interference and a crystal clear signal between the baby unit and the parent unit. [. . . ] Switching to another lullaby 1 Press the + button to choose another lullaby from the list. You can set the microphone sensitivity of the baby unit to the desired level. You can only change the microphone sensitivity when a connection between the baby unit and the parent unit has been established, i. When the LINK light on the parent unit lights up green continuously. If you do not resume the lullaby within 30 seconds, the lullaby function switches off automatically. 3 Select the desired microphone sensitivity level for the baby unit with the + and buttons. 24) 1 Minimum sensitivity level 2 Maximum sensitivity level 4 Press the OK button to confirm. , The message `Saved' appears on the display. Sound alert on/off Note:You can only switch the sound alert on and off in the menu of the parent unit. This feature allows you to monitor your baby silently. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( g) flashes on the display. 5 If the alert is off, the display shows `On?, If you have set the sound alert to `on', the sound alert symbol ( g) appears on the display of the parent unit. Setting room temperature range Note:You can only adjust the temperature range in the menu of the parent unit. A baby will sleep comfortably in a room heated to a temperature between 16°C and 20°C. This is important, since a baby cannot regulate its body temperature as well as an adult. a baby needs more time to adjust to temperature changes. If you do not set a temperature range, the baby monitor alerts you when the temperature in your baby's room drops below 14°C or rises above 35°C. In this case, the backlight of the parent unit display goes on and `High' or `Low' appears on the display. to change the default minimum and maximum temperature , follow the instructions below. [. . . ] Inside the house, the operating range is up to 50 metres/150 feet. When you operate the baby unit in ECO mode, the operating range is 260 meters/800 feet in open air. Inside your house, the operating range is limited by the number and type of walls and/or ceilings in between. Move the parent unit closer to the baby unit or switch off the ECO mode. [. . . ]