User manual PHILIPS SCD560/00

[. . . ] ς Manual del usuario Käyttöopas Mode d’emploi 3 IT Manuale utente 150 171 192 212 234 254 292 23 NL Gebruiksaanwijzing 43 NO Brukerhåndbok 64 PT Manual do utilizador 88 SV Användarhandbok 109 TR Kullanım kılavuzu 128 AR 11 Ordering accessories 3 12 Guarantee and support 13 Frequently asked questions 19 20 20 1 2 Introduction Product overview 3 4 4 5 6 6 7 8 8 8 9 10 10 10 11 11 13 13 14 14 14 15 16 16 17 17 18 18 19 19 3 Preparing for use 3. 2 Parent unit 4 Using the baby monitor 4. 2 Linking parent unit and baby unit 5 5. 9 8 9 Functions and feedback on the baby unit Nightlight Lullaby function Paging the parent unit Battery status light Functions and feedback on the parent unit Volume Talk function Battery status indications Signal strength indicator Reset Menu of the parent unit Navigating the menu Sensitivity Eco Max mode Nightlight Lullaby Feed timer Temperature Clock Language Neck strap Cleaning and maintenance 1 Introduction Congratulations on your purchase and welcome to Philips AVENT! [. . . ] medium Hear sounds from soft cries and louder. If your baby makes softer sounds, the speaker of the parent unit does not go on. Low The speaker of the parent unit only goes on if the baby makes loud sounds, for instance because it is crying. €• Before you select Eco Max mode, make sure that the parent unit and baby unit are within operating range, see section ‘Operating range’ in chapter ‘Using the baby monitor’. In Eco Max mode you do not receive feedback when the parent unit is out of range of the baby unit. You can check the link by pressing any button on the parent unit. €• If there is no radio transmission from the baby unit to the parent unit in Eco Max mode, the sound level lights on the parent unit are off. The sound level lights go on when the baby unit reactivates radio transmission because the baby makes a sound above the selected sensitivity level. €• If you want to operate the baby monitor in Eco Max mode, make sure that the sensitivity level is set between 1 and 3. If the sensitivity level is set to level 4, the baby unit does not switch off radio transmission in Eco Max mode. 2 Activating Eco Max mode 1 Select ‘Eco Max’ in the menu with the + and buttons and press OK to confirm. 2 When the display shows ‘Turn On’, press OK to switch on the Eco Max mode. 3 The warning message ‘No alert if out of range, OK?D Note: The warning message scrolls across the display twice. If you do not press OK, the parent unit leaves the menu and the Eco Max mode remains off. •• The Eco Max indication flashes on the display. The ‘link’ light flashes green slowly when the baby unit does not transmit any signals to the parent unit. 4 Nightlight This option in the parent unit menu allows you to switch the nightlight on the baby unit on and off. 1 Select ‘Nightlight’ in the menu with the + and - buttons. 3 When the nightlight is on and you want to switch it off, press OK to choose ‘Turn Off ’. 5 Lullaby This option in the parent unit menu allows you to choose and play one or more lullabies on the baby unit and also to stop playing lullabies. €• When the parent unit receives a signal from the baby unit because radio transmission has been reactivated, the ‘link’ light turns solid green. [. . . ] Try a different location or decrease the distance between the units. Please note that it takes about 30 seconds each time before a connection between the units is established. €• You may have placed the unit next to a transmitter or other DECT appliance, such as a DECT telephone or other 1. Move the unit away from the other appliances until the connection is reestablished. [. . . ]