User manual PHILIPS SCD590

[. . . ] 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] - As long as the baby unit does not detect a sound, all sound level lights on the parent unit are out. - When the baby unit picks up a sound, one or more sound level lights on the parent unit go on. The number of lights that go on is related to the loudness of the sound picked up by the baby unit. Press the nightlight button Q again to switch off the nightlight. , The nightlight dims gradually before it goes out completely. Tip: Switch off the nightlight when you operate the baby unit on non-rechargeable batteries. Paging the parent unit If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button on the baby unit to locate the parent unit. Note:The paging function only works when the parent unit is switched on. Lullabies function 1 Press the play/stop button E on the baby unit to play the currently selected lullaby. 8) To select another lullaby, press the lullaby button K on the baby unit within seconds to toggle through the list of lullabies. ) Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display starts to play. H = minimum sensitivity level , i = maximum sensitivity level Note:The arrow indicates in which direction you can navigate. Note:When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. as a result , the units consume more power. Sound alert on/off Note:You can only switch the sound alert on and off in the menu of the parent unit. This feature allows you to monitor your baby silently. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( g) flashes on the display. If the alert is off, the display shows `On?If you have set the sound alert to `on', the sound alert symbol ( g) appears on the display of the parent unit. A baby will sleep comfortably in a room heated to a temperature between 61°F (16°C) and 68°F (20°C). [. . . ] perhaps you have switched on the nightlight. If you want to use the nightlight, we advise you to run the baby unit on outlet electricity. Why does the charging time of the parent unit exceed 4 hours? the specified operating range of the baby monitor is 1000 feet/330 meters. [. . . ]