User manual PHILIPS SCD-600

[. . . ] Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. The Philips AVENT video monitor provides you with round-the-clock support and it allows you to see your baby day and night from anywhere in the house. The latest digital technology guarantees crystal-clear sound and the clearest image of your baby. [. . . ] - When the baby unit picks up a sound, one or more sound level lights on the parent unit go on. The number of lights that go on is related to the loudness of the sound picked up by the baby unit. The sound level lights also go on when the parent unit is set to a low volume or when the automatic screen activation mode is activated (see section `Automatic screen activation' below) (Fig. Automatic screen activation The parent unit continuously monitors the sound level in your baby´s room. When the automatic screen activation mode is activated, the video display only switches on when the baby unit picks up a sound. As long as no sound is detected, the video display is off to save power. 24) , The automatic screen activation light on the parent unit goes on (Fig. , When the baby unit detects a sound, the video display on the parent unit automatically goes on to show the baby. When no sound is detected for 30 seconds, the video display goes out again. 2 To switch off the automatic screen activation mode, press the automatic screen activation button on the parent unit again. 27) 2 Press the nightlight button again to switch off the nightlights. Tip: Switch off the nightlights when you operate the baby unit on non-rechargeable batteries. Lullaby function Note:When the baby unit plays a lullaby, it consumes more power. , The lullaby starts to play on the baby unit and repeats continuously. 3 To select another lullaby when a lullaby is playing: Press the `next lullaby' button on the parent unit. 29) If you want a different lullaby, press the `next lullaby' button on the parent unit again. When the parent unit is out of range of the baby unit, the parent unit beeps once and the message `Out of range' appears on the video display. The LINK light on the parent unit flashes red. Note:The message `Out of range' also appears on the video display of the parent unit when the baby unit is switched off. Night vision The camara has infrared lights that allow you to see your baby clearly, even in a dark room. When the lens detects low light levels, the infrared lights are activated automatically. 5 metres/3 to 5 feet away from the baby to ensure a clear view. [. . . ] Answer Interference may occur when the parent unit is out of range of the baby unit. Interference may also occur if there are too many walls or ceilings between the parent unit and the baby unit or when other 2. Put the parent unit in a different place, closer to the baby unit, or switch off other wireless devices. The rechargeable battery of the parent unit may need to be charged. [. . . ]