User manual PHILIPS SCE7640

[. . . ] Read and observe all warnings on the power pack and in this user manual. Power consumption of the connected device must not exceed 19 V, 2000 mA. Never use the power pack in moist places or close to water. Do not expose the power pack to rain or excessive moisture. [. . . ] > If the device has a charging indicator , it will indicate that the device is being charged. Tip: For several portable devices (5V), a USB connection cable is supplied with the original device (e. In this case, you can also use this cable to charge your device. D) 1 Insert the notebook connection cable into the OUTPUT 16V DC-19V DC jack (2) of the power pack. 2 Connect the connector tip to the notebook connection cable. 3 Insert the connector tip into the power supply jack of the notebook computer. > The notebook computer will now derive it's power from the power pack. > One, two or three LEDs light up in the power indicator (5), indicating the current battery status. if all four LEDs light up , the battery is fully charged. 2 Connect one power cord plug to the AC power adapter. 3 Connect the adapter plug to the INPUT 19V DC jack (3) of the power pack. 4 Connect the power plug of the power cord to a wall outlet. > The power indicator LEDs (5) will flash one after another, indicating that the battery is being charged. > When all LEDs light continuously the battery is fully charged. 5 Disconnect the battery pack from the AC power adapter and disconnect the AC power adapter from the wall outlet. Power pack runs out of power quickly ­ Power pack not fully charged before using. ­ Supplied AC power adapter was not used for charging power pack. Only use supplied AC power adapter for charging power pack. Power pack cannot be charged ­ Improper connection between power pack and wall outlet. Check that power cord is properly inserted into both wall outlet and AC power adapter. Check that adapter plug is properly inserted into the INPUT 19V DC Jack of the power pack. ­ Problems with the electrical circuit of the power pack. [. . . ] Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. [. . . ]