User manual PHILIPS SCF250

[. . . ] Test food on inside of hand before serving to ensure it is at a safe temperature for your baby. use only containers that have been approved for boiling. [. . . ] Remove the jar from the container and turn the control knob to the left to the `0' (OFF) position. 8 Stir the contents of the jar to distribute the heat. 9 Always check that the contents of the jar are at the correct temperature by testing some on the back of your hand or via your mouth. 10 If the temperature is much too low, fill the beaker again with 10ml. Turn the click-step control knob 4 to the right until the indicator lamp lights up red to start the heating up again. Warming the jar without the ring, might result in a wrong temperature, therefore never use the bottle warmer without the ring. With the Baby Bottle Warmer you can also keep the bottles and jars warm for a short time. For microbiological and hygienic reasons baby food should never be kept warm for longer than one hour. Never hold the Baby Bottle Warmer in your hands when in use. Disconnect the Baby Bottle Warmer from the mains socket and allow it to cool down. Clean the container and the outside of the Baby Bottle Warmer with a damp cloth. Under no circumstances should you try to repair the Bottle Warmer yourself; do not dismantle. [. . . ] 1 2 3 4 5 6 Vrid inställningsratten 4 till vänster till läget `0' (AV). Specifications are subject to change without notice. [. . . ]