User manual PHILIPS SCF-304

[. . . ] When assembled parts b ­ g make up an assembled pump body. When the Control handle (a) is added to this assembled pump body, it becomes the First (Control) Pump. When the Double pumping connector (l) is added to this assembled pump body, it becomes the Second Pump. B 2x Silicone diaphragm c 2x White valve d 2x Pump body e 2x Milk container (2x 4 oz/125 ml) f 2x Stand (same as h ) g 2x Let-down Massage Cushion h 2x Funnel cover (same as f ) i 1x Control cable j 2x Transparent tube k 1x Twin tubing l 1x Double pumping connector m 1x Pump motor n 1x Electric adaptor o 1x Wall plug cord p 2x Dome cap All you need to assemble and use the breast pump is shown here. [. . . ] cAUTION: DO NOT CONTINUE PUMPING FOR MORE THAN 5 MINUTES AT A TIME IF NO RESULT IS ACHIEVED. Stop, and try expressing milk at another time of day. It has been shown that double pumping boosts prolactin levels and stimulates milk production so, if you can, use your breast pump regularly as a double pump. On average you will need to pump for 10 minutes to express 60-120 mls or 2-4 oz of milk. However, this is just a guide and varies from woman to woman. If you find that you regularly express more than 4 oz/125 ml of milk per session, attach a 9 oz/260 ml AVENT Breast Milk Container to the pump body. Before assembling, make sure that you have correctly washed and sanitized the pump. Parts you will need for this step: Insert the white valve into the pump body, so that it fits securely into the small round hole. Screw the pump body onto the milk container until securely in place. To ensure that the pump is completely stable, you can use the stand with the 4 oz/125 ml milk container. Fit the clear silicone diaphragm into the pump body. Ensure a perfect seal around the rim by pressing down with your fingers. (This is easier if assembled while the diaphragm is wet. The Let-down Massage Cushion has petals that flex in and out to gently massage the area around the breast. This is intended to help stimulate a fast, natural milk flow. When using the breast pump without the Let-down Massage Cushion, the maximum vacuum level achievable will be higher. Parts you will need for this step: Complete the next step with your second assembled pump body. Push the double pumping connector onto the pump body so that it sits firmly on top of the silicone diaphragm. securely attach the other transparent tube to the double pumping connector. When the breast pump is fully assembled, the Second Pump will mimic simultaneously the speed and suction of the First (Control) Pump. Complete the next step with the remaining tube. If you are single pumping, you can keep the transparent tube out of the way by attaching it to the white clip. [. . . ] This is intended to help stimulate a fast, natural milk flow. When using the breast pump without the Let-down Massage Cushion, the maximum vacuum level achievable will be higher. Never immerse a frozen bottle or liner in boiling water as this may cause it to crack/split. ° Please refer to Tote Bag Instructions for complete directions on how to store and transport breast milk using the ThinsulateTM carriers. [. . . ]